NASCLA Accredited Electrical Exam Prep

Prepare for the electrical challenges of tomorrow, today, with NFPA 70, National Electrical Code (NEC), 2020 edition.

The world never stops changing, so it's crucial to keep learning how to keep it safe. Incorporated by reference in all 50 states and used across the globe, NFPA 70®, National Electrical Code® (NEC®), is the benchmark standard for electrical safety in residential, commercial, and industrial settings.

NFPA 70, NEC, was first published in 1897 and is continually put through a rigorous review process to keep it up to date with the most current industry practices, emerging trends, and the development and introduction of new technologies. The new NEC provides the latest requirements for safer and more effective electrical design, installation, and inspection, including provisions for wiring, overcurrent protection, grounding, and equipment.

Get up-to-code and prepared for the safety challenges of new sources of electrical power with the NEC, 2020 edition.

The revised and expanded NFPA 70, National Electrical Code, features state-of-the-art information for safe electrical practices for public and private buildings, homes and structures, outdoor yards and lots, utility equipment, installations that connect to the power grid, and consumer-owned power generation systems and equipment.

Content has been added, edited, and reorganized to address safety for workers, energy systems and electric vehicles, limited energy, and communication systems.

Impactful changes include:

• New requirements for exterior emergency disconnects of one- and two-family dwellings for improved electrical safety for emergency responders
• Revisions to service disconnect rules to help protect electrical workers from arc flash hazards
• Adapted and adjusted requirements for installation practices of new technologies to meet the evolving demand of power over Ethernet
• Updates to modernize tables currently in use for calculations to reflect improvements in energy efficiency and align with evolving codes
• Revised requirements for ground-fault protection within marinas and boatyards
• Introduction of guidelines for the safe use of electric vehicles (electric vehicle power export equipment) as a backup or emergency power source for a building or a home
• Reorganization of Article 310, including new user-friendly numbering for important ampacity tables, and new definition for cable bundle in Article 725
• Relocation of surge protection device requirements to new Article 242
• Revisions to alternative energy systems and electric vehicle requirements to clarify what portions of the PV system are covered by the requirements of Article 690 and the line side and load side connections of interconnected power supply sources, and to clearly distinguish energy storage systems from storage battery systems
• Reorganization of Article 800 to provide a general set of requirements to apply throughout the Chapter 8 articles
• Revisions to requirements for communications cables that are also carrying power to communication devices and revisions to the current limit for cables carrying power and data

The NEC, 2020 edition, introduces significant new requirements for:

• The residential installation of receptacle outlets serving island and peninsular countertops and for surge protection of services supplying dwelling units
• Working space for “housekeeping pads” for electrical equipment, the installation of wiring methods in exit enclosures, sizing supply and load conductors used with adjustable-speed drive systems, and AFCI protection of branch circuits in patient sleeping areas in care facilities
• Calculating the load of electric vehicle supply equipment with variable current settings
• Worker safety in identifying the source of power for disconnecting means and for egress from spaces containing large electrical equipment
• Grounding of disconnecting means installed on the supply-side of service disconnecting means
• Cables installed exposed on ceiling surfaces and sidewalls
• Special occupancies, special equipment, and special conditions, including installation of splash pads, the use of “Type P” cables in hazardous classified locations, and the reinspection of swimming pools and other bodies of water

Help protect life and property with the most relevant electrical requirements.

Get the cutting edge information you need to identify and overcome the latest hazards and complexities in electrical work. Order your copy of NFPA 70®, National Electrical Code, 2020 edition, today.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

DELMAR'S STANDARD TEXTBOOK OF ELECTRICITY, 7TH EDITION by Stephen Herman provides a critical foundation in electrical theory, which forms the backbone for all careers that encompass the electrical industry, including motor controls, PLCs, lineman, contractors, fiber optics and wiring. Assuming no prior knowledge of electricity, the author uses practical examples to introduce basic electrical circuits, DC and AC theory, as well as meters, transformers and motors.

The IRC contains many important changes such as:

• An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable.
• The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall.
• An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening.
• The exemption for interconnection of smoke alarms in existing areas has been deleted.
• New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine.
• New tables address alternative wood stud heights and the required number of full height studs in high wind areas.

NFPA 101, Life Safety Code, is the most widely referenced source for occupant safety strategies based on construction, protection, and occupancy features in all stages of a building life cycle. Relevant to life safety in both new and existing structures, NFPA 101 covers everything from means of egress and features of fire protection to hazardous materials emergencies, injuries from falls, and emergency communications.

Keep the workplace safe from electrical hazards using the 2018 edition of NFPA 70E®.

In a fraction of a second, an electrical incident can claim lives and cause permanently disabling injuries. In fact, hundreds of deaths and thousands of burn injuries occur each year due to shock, electrocution, arc flash, and arc blast -- and most could be prevented through compliance with NFPA 70E, Standard for Electrical Safety in the Workplace®.

Originally developed at OSHA's request, NFPA 70E responds to the latest information about the effects of arc flash, arc blast, and direct current (dc) hazards, and recent developments in electrical design and Personal Protective Equipment (PPE). It provides vital information that helps you comply with OSHA 1910 Subpart S and OSHA 1926 Subpart K.

Make sure everyone goes home at night. New NFPA 70E explicitly states that the first priority must be the elimination of the hazard.

The Standard continues to evolve to address risk assessment and introduces human factors, such as human error, as part of that assessment. Annex Q, Human Performance and Workplace Electrical Safety, is included to provide guidance. NFPA 70E emphasizes the need to use the hierarchy of risk controls, by moving it from an informational note into the text of the Standard. NFPA 70E now explicitly states that the first priority must be the elimination of the hazard.

Other changes in this edition:

• A modified arc flash hazard identification table [Table 130.7(C)(15)(A)(a)] makes it easier to determine the likelihood that an arc flash could occur.
• Reorganized Article 120 presents the requirements for establishing an electrically safe work condition in a logical order of application of the program.
• Changes to Article 320 introduce voltage thresholds of 100 Vdc specifically for batteries and battery rooms to cover the unique situations in these locations.
• Extensively revised, Article 330 on lasers now focuses on safety-related maintenance issues rather than issues associated with laser use.
• Article 350 introduces an Electrical Safety Authority as a possible authority having jurisdiction for laboratories.

Bring your company's electrical safety program up-to-date and give employees critical knowledge.

If you're responsible for ensuring workers are protected from shock and arc flash hazards, use the 2018 edition of NFPA 70E along with NFPA 70®, National Electrical Code® (NEC®) and NFPA 70B, Electrical Equipment Maintenance. Together, the "Big Three" help you protect your personnel and your company from tragic loss. NFPA 70E is a vital tool for contractors, risk managers, engineers, building managers, owners, and everyone concerned with ending electrical-related accidents, liability, and loss.

NFPA 72 provides the latest safety provisions to meet society's changing fire detection, signaling, and emergency communications demands. In addition to the core focus on fire alarm systems, the Code includes requirements for mass notification systems used for weather emergencies; terrorist events; biological, chemical, and nuclear emergencies; and other threats.

Ugly’s Electrical References, 2020 Edition is the essential on-the-job reference tool for electrical industry professionals.

The 2020 Edition offers the most pertinent, up-to-date information for electricians, including updated National Electric Code (NEC) and table change information, mathematical formulas; National Electrical Manufacturers Association (NEMA) wiring configurations; a conduit bending guide, ampacity and conduit fill information, transformer and control circuit wiring diagrams, and conversion tables.

The 2020 Edition:

• Reflects changes to the 2020 NEC
• Features expanded coverage of the following topics:
• Junction Box size calculations
• Selecting, testing, and using multimeters to measure voltage, resistance, and current
• Selecting, testing, and using a clamp-on ammeter to measure current
• Selecting, testing, and using a non-contact voltage tester

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

**SPECIAL ORDER**

The design of safety signs for products has been influenced for many years by standards originally developed for accident prevention signs to be used in the general environment. As product safety signs evolved, some basic differences developed between their characteristics and those of environmental safety signs: Environmental safety signs are usually larger, observed at longer distances, and frequently contain lesser amounts of information for visual clarity at a distance. Product safety signs are likely to contain more information within a smaller format, are usually observed at closer distances, and must physically and visually integrate with a wide range of product size, shape, and color characteristics. Attempts by product manufacturers to address these variable characteristics have produced numerous approaches to the graphic treatment of such signs.

DELMAR'S STANDARD TEXTBOOK OF ELECTRICITY, 7TH EDITION by Stephen Herman provides a critical foundation in electrical theory, which forms the backbone for all careers that encompass the electrical industry, including motor controls, PLCs, lineman, contractors, fiber optics and wiring. Assuming no prior knowledge of electricity, the author uses practical examples to introduce basic electrical circuits, DC and AC theory, as well as meters, transformers and motors.

The IRC contains many important changes such as:

• An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable.
• The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall.
• An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening.
• The exemption for interconnection of smoke alarms in existing areas has been deleted.
• New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine.
• New tables address alternative wood stud heights and the required number of full height studs in high wind areas.

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections.

Everyone who works on or near electrical equipment, or who supervises someone who does, needs the life-saving guidance in the NFPA 70E Handbook. Many workers are unaware of how using NFPA 70E: Standard for Electrical Safety in the Workplace reduces their risks to electrical hazards. This Standard is not only important, it helps companies comply with OSHA 1910 Subpart S and OSHA 1926 Subpart K. Revised to reflect the latest edition of NFPA 70E, the new NFPA 70E Handbook offers explanations and advice to help you interpret the Standard and make the right decisions every day on the job.

Cutting through the confusion of industry jargon and common misconceptions, and using correct defined terminology, the 14th edition of Soares Book on Grounding and Bonding guides the reader step-by-step through the language and intent of the National Electrical Code, NEC-2020.

Ugly’s Electrical References, 2020 Edition is the essential on-the-job reference tool for electrical industry professionals.

The 2020 Edition offers the most pertinent, up-to-date information for electricians, including updated National Electric Code (NEC) and table change information, mathematical formulas; National Electrical Manufacturers Association (NEMA) wiring configurations; a conduit bending guide, ampacity and conduit fill information, transformer and control circuit wiring diagrams, and conversion tables.

The 2020 Edition:

• Reflects changes to the 2020 NEC
• Features expanded coverage of the following topics:
• Junction Box size calculations
• Selecting, testing, and using multimeters to measure voltage, resistance, and current
• Selecting, testing, and using a clamp-on ammeter to measure current
• Selecting, testing, and using a non-contact voltage tester

NFPA 72 provides the latest safety provisions to meet society's changing fire detection, signaling, and emergency communications demands. In addition to the core focus on fire alarm systems, the Code includes requirements for mass notification systems used for weather emergencies; terrorist events; biological, chemical, and nuclear emergencies; and other threats.

Prepare for the electrical challenges of tomorrow, today, with NFPA 70, National Electrical Code (NEC), 2020 edition.

The world never stops changing, so it's crucial to keep learning how to keep it safe. Incorporated by reference in all 50 states and used across the globe, NFPA 70®, National Electrical Code® (NEC®), is the benchmark standard for electrical safety in residential, commercial, and industrial settings.

NFPA 70, NEC, was first published in 1897 and is continually put through a rigorous review process to keep it up to date with the most current industry practices, emerging trends, and the development and introduction of new technologies. The new NEC provides the latest requirements for safer and more effective electrical design, installation, and inspection, including provisions for wiring, overcurrent protection, grounding, and equipment.

Get up-to-code and prepared for the safety challenges of new sources of electrical power with the NEC, 2020 edition.

The revised and expanded NFPA 70, National Electrical Code, features state-of-the-art information for safe electrical practices for public and private buildings, homes and structures, outdoor yards and lots, utility equipment, installations that connect to the power grid, and consumer-owned power generation systems and equipment.

Content has been added, edited, and reorganized to address safety for workers, energy systems and electric vehicles, limited energy, and communication systems.

Impactful changes include:

• New requirements for exterior emergency disconnects of one- and two-family dwellings for improved electrical safety for emergency responders
• Revisions to service disconnect rules to help protect electrical workers from arc flash hazards
• Adapted and adjusted requirements for installation practices of new technologies to meet the evolving demand of power over Ethernet
• Updates to modernize tables currently in use for calculations to reflect improvements in energy efficiency and align with evolving codes
• Revised requirements for ground-fault protection within marinas and boatyards
• Introduction of guidelines for the safe use of electric vehicles (electric vehicle power export equipment) as a backup or emergency power source for a building or a home
• Reorganization of Article 310, including new user-friendly numbering for important ampacity tables, and new definition for cable bundle in Article 725
• Relocation of surge protection device requirements to new Article 242
• Revisions to alternative energy systems and electric vehicle requirements to clarify what portions of the PV system are covered by the requirements of Article 690 and the line side and load side connections of interconnected power supply sources, and to clearly distinguish energy storage systems from storage battery systems
• Reorganization of Article 800 to provide a general set of requirements to apply throughout the Chapter 8 articles
• Revisions to requirements for communications cables that are also carrying power to communication devices and revisions to the current limit for cables carrying power and data

The NEC, 2020 edition, introduces significant new requirements for:

• The residential installation of receptacle outlets serving island and peninsular countertops and for surge protection of services supplying dwelling units
• Working space for “housekeeping pads” for electrical equipment, the installation of wiring methods in exit enclosures, sizing supply and load conductors used with adjustable-speed drive systems, and AFCI protection of branch circuits in patient sleeping areas in care facilities
• Calculating the load of electric vehicle supply equipment with variable current settings
• Worker safety in identifying the source of power for disconnecting means and for egress from spaces containing large electrical equipment
• Grounding of disconnecting means installed on the supply-side of service disconnecting means
• Cables installed exposed on ceiling surfaces and sidewalls
• Special occupancies, special equipment, and special conditions, including installation of splash pads, the use of “Type P” cables in hazardous classified locations, and the reinspection of swimming pools and other bodies of water

Help protect life and property with the most relevant electrical requirements.

Get the cutting edge information you need to identify and overcome the latest hazards and complexities in electrical work. Order your copy of NFPA 70®, National Electrical Code, 2020 edition, today.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

This edition of the PMBOK^® Guide:

• Reflects the full range of development approaches (predictive, traditional, adaptive, agile, hybrid, etc.)
• Provides an entire section devoted to tailoring the development approach and processes
• Expands the list of tools and techniques in a new section, “Models, Methods, and Artifacts”
• Focuses on project outcomes in addition to deliverables
• Integrates with for access to content that helps the user apply the PMBOK^® Guide on the job

Including both The Standard for Project Management and the PMBOK^® Guide, this modern edition presents 12 principles of project management and eight project performance domains critical for the effective delivery of project outcomes. 

NFPA 72 provides the latest safety provisions to meet society's changing fire detection, signaling, and emergency communications demands. In addition to the core focus on fire alarm systems, the Code includes requirements for mass notification systems used for weather emergencies; terrorist events; biological, chemical, and nuclear emergencies; and other threats.

Standard 90.1 has been a benchmark for commercial building energy codes in the United States and a key basis for codes and standards around the world for more than 35 years. This standard provides the minimum requirements for energy-efficient design of most buildings, except low-rise residential buildings.

DELMAR'S STANDARD TEXTBOOK OF ELECTRICITY, 7TH EDITION by Stephen Herman provides a critical foundation in electrical theory, which forms the backbone for all careers that encompass the electrical industry, including motor controls, PLCs, lineman, contractors, fiber optics and wiring. Assuming no prior knowledge of electricity, the author uses practical examples to introduce basic electrical circuits, DC and AC theory, as well as meters, transformers and motors.

The IRC contains many important changes such as:

• An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable.
• The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall.
• An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening.
• The exemption for interconnection of smoke alarms in existing areas has been deleted.
• New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine.
• New tables address alternative wood stud heights and the required number of full height studs in high wind areas.

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections.

NFPA 101, Life Safety Code, is the most widely referenced source for occupant safety strategies based on construction, protection, and occupancy features in all stages of a building life cycle. Relevant to life safety in both new and existing structures, NFPA 101 covers everything from means of egress and features of fire protection to hazardous materials emergencies, injuries from falls, and emergency communications.

Keep the workplace safe from electrical hazards using the 2018 edition of NFPA 70E®.

In a fraction of a second, an electrical incident can claim lives and cause permanently disabling injuries. In fact, hundreds of deaths and thousands of burn injuries occur each year due to shock, electrocution, arc flash, and arc blast -- and most could be prevented through compliance with NFPA 70E, Standard for Electrical Safety in the Workplace®.

Originally developed at OSHA's request, NFPA 70E responds to the latest information about the effects of arc flash, arc blast, and direct current (dc) hazards, and recent developments in electrical design and Personal Protective Equipment (PPE). It provides vital information that helps you comply with OSHA 1910 Subpart S and OSHA 1926 Subpart K.

Make sure everyone goes home at night. New NFPA 70E explicitly states that the first priority must be the elimination of the hazard.

The Standard continues to evolve to address risk assessment and introduces human factors, such as human error, as part of that assessment. Annex Q, Human Performance and Workplace Electrical Safety, is included to provide guidance. NFPA 70E emphasizes the need to use the hierarchy of risk controls, by moving it from an informational note into the text of the Standard. NFPA 70E now explicitly states that the first priority must be the elimination of the hazard.

Other changes in this edition:

• A modified arc flash hazard identification table [Table 130.7(C)(15)(A)(a)] makes it easier to determine the likelihood that an arc flash could occur.
• Reorganized Article 120 presents the requirements for establishing an electrically safe work condition in a logical order of application of the program.
• Changes to Article 320 introduce voltage thresholds of 100 Vdc specifically for batteries and battery rooms to cover the unique situations in these locations.
• Extensively revised, Article 330 on lasers now focuses on safety-related maintenance issues rather than issues associated with laser use.
• Article 350 introduces an Electrical Safety Authority as a possible authority having jurisdiction for laboratories.

Bring your company's electrical safety program up-to-date and give employees critical knowledge.

If you're responsible for ensuring workers are protected from shock and arc flash hazards, use the 2018 edition of NFPA 70E along with NFPA 70®, National Electrical Code® (NEC®) and NFPA 70B, Electrical Equipment Maintenance. Together, the "Big Three" help you protect your personnel and your company from tragic loss. NFPA 70E is a vital tool for contractors, risk managers, engineers, building managers, owners, and everyone concerned with ending electrical-related accidents, liability, and loss.

Cutting through the confusion of industry jargon and common misconceptions, and using correct defined terminology, the 14th edition of Soares Book on Grounding and Bonding guides the reader step-by-step through the language and intent of the National Electrical Code, NEC-2020.

Ugly’s Electrical References, 2020 Edition is the essential on-the-job reference tool for electrical industry professionals.

The 2020 Edition offers the most pertinent, up-to-date information for electricians, including updated National Electric Code (NEC) and table change information, mathematical formulas; National Electrical Manufacturers Association (NEMA) wiring configurations; a conduit bending guide, ampacity and conduit fill information, transformer and control circuit wiring diagrams, and conversion tables.

The 2020 Edition:

• Reflects changes to the 2020 NEC
• Features expanded coverage of the following topics:
• Junction Box size calculations
• Selecting, testing, and using multimeters to measure voltage, resistance, and current
• Selecting, testing, and using a clamp-on ammeter to measure current
• Selecting, testing, and using a non-contact voltage tester

Custom Tab Bundle, please specify which books these tabs should reference at checkout

Custom Tab Bundle, please specify which books these tabs should reference at checkout