Construction

**Special Order** Provides comprehensive minimum regulations for plumbing facilities in terms of both performance and prescriptive objectives, and provides for the acceptance of new and innovative products, materials and systems.

Featuring time-tested safety concepts and the very latest industry standards in material design, the 2012 INTERNATIONAL BUILDING CODE offers up-to-date, comprehensive insight into the regulations surrounding the design and installation of building systems.

The 2012 International Fuel Gas Code softbound version sets forth requirements that address the design and installation of fuel gas systems and gas-fired appliances, based on the most current information and technology available.

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. First introduced in 1996, the IMC was developed with broad-based principles that make possible the use of new materials, methods and design.

With an emphasis on design and installation for optimum performance, the 2012 International Plumbing Code softbound version sets forth established requirements for plumbing systems. This important reference guide includes provisions for fixtures, piping, fittings, and devices, as well as design and installation methods for water supply, sanitary drainage, and storm drainage.

New code sections have been added to the 2015 IBC that cover rooftop mounted photovoltaic solar panels and all the content in the book is developed in the context of the broad-based principles that facilitate the use of new materials and building designs. The updates to this code make it an essential reference guide for anyone seeking a strong working knowledge of building systems.

Code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes and commercial businesses.

**Special Order** Contains requirements intended to encourage the use and reuse of existing buildings. The scope covers repair, alteration, addition and change of occupancy for existing buildings and historic buildings, while achieving appropriate levels of safety without requiring full compliance with the new construction requirements contained in the other I-Codes.

The 2015 International Fuel Gas Code sets forth requirements that address the design and installation of fuel gas systems and gas-fired appliances, based on the most current information and technology available. The requirements are performance-driven, making this an effective tool and valuable addition to a user's code products. In this updated code, the section on protection of piping has been completely rewritten, and readers are informed that line regulators installed in rigid piping must have a union installed to allow removal of the regulator.

For the most current mechanical codes that address the design and installation of the most current mechanical systems, use the 2015 International Mechanical Code soft cover. Designed to provide comprehensive regulations for mechanical systems and equipment, it includes coverage of HVAC, exhaust systems, chimneys and vents, ducts, appliances, boilers, water heaters, refrigerators, hydronic piping, and solar systems.

With an emphasis on design and installation for optimum performance, the 2015 International Plumbing Code soft cover sets forth established requirements for plumbing systems. This important reference guide includes provisions for fixtures, piping, fittings, and devices, as well as design and installation methods for water supply, sanitary drainage, and storm drainage.

This comprehensive code compiles all building, plumbing, mechanical, fuel gas and electrical requirements for non-commercial one- and two-family dwellings in one convenient code. The regulations cover dwellings and townhouses up to three stories.

***Special Order*** A fully integrated custom code based on the 2015 International Building Code

A fully integrated custom code based on the 2015 International Mechanical Code

**Special Order** A fully integrated custom code based on the 2015 International Plumbing Code.

***Special Order*** A fully integrated custom code based on the 2015 International Rehabilitation Code for Existing Buildings

This is a soft cover fully integrated custom Minnesota code based on the 2012 International Mechanical Code® and 2012 International Fuel Gas Code® with ANSI/ASHRAE Standard 154-2011, Ventilation for Commercial Cooking Operations. This code also includes Minnesota chapter 1300 Administration.

The Florida Building Code (2017) is the most complete source of code standards and compliance information in the construction industry. It is arguably the single-most important book in the construction industry since it defines the standards with which construction products and installations must comply throughout the construction process.

This code comes in a loose-leaf format. The 6th Edition (2017) update to the Florida Building Code: Test Protocols for High Velocity Hurricane Zones updates the 2014, 5th Edition.

This is a fully integrated code based on the 2015 International Mechanical Code®.

This is a fully integrated code based on the 2015 International Plumbing Code®.

This is a fully integrated code based on the 2018 International Fuel Gas Code®.

This is a fully integrated code based on the 2018 International Plumbing Code®.

The scope of the International Building Code® (IBC®) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories.