New Mexico MM-98 Combined - Mechanical License

Furthermore, it addresses specific provisions for low flammability refrigerants such as A2L and B2L; which makes it one of the first codes in the industry to address specific provisions for these low Global Warming Potential (GWP) refrigerants. Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/ testing laboratories, special experts and users.

The UMC provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies. Key changes to the 2021 UMC include:

• New Appendix F – Geothermal Energy Systems
• New guards and rails requirements for installation of equipment and appliances on roofs
• New ventilation requirements for transient and nontransient occupancies
• New ventilation requirements for indoor air quality for residential occupancies
• Revisions to the requirements for air ducts, including factory-made air ducts and dampers
• New provisions for factory-built grease ducts
• New provisions for refrigeration systems, including pressure-limiting devices and hydrostatic expansion
• Revisions to the sizing requirements for natural gas and propane piping systems
• Modifications to the pressure rating requirements for hydronic piping applications
• New requirements for fuel gas piping appliance shutoff valves, test pressure, and overpressure protection devices
• New tube fastener provisions for radiant heating and cooling
• New requirements for residential compressed natural gas (CNG) fueling systems
• New fire-extinguishing equipment and carbon monoxide detection requirements for exhaust systems

Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/testing laboratories, special experts and users.

The UPC is designed to provide consumers with safe and sanitary plumbing systems while, at the same time, allowing latitude for innovation and new technologies. Key changes to the 2021 UPC include:

• New Appendix N – Impact of Water Temperature on the Potential for Scalding and Legionella Growth
• New provisions for backflow prevention devices, assemblies, and methods
• New provision of temperature limiting devices
• New guard and rail requirements for appliances on roofs and platforms
• New requirements for the discharge of temperature and pressure relief valve piping
• New provision on leak detection devices
• Provisions for potable water pumps
• New standards for drain, waste, and vent pipe and fittings
• New provisions for drain waste and vent cleanouts
• Circuit vent provisions have been updated and expanded
• Updated to fuel gas provisions
• Updated medical gas provisions including reordering of categories for ease of use

IPT’s Pipe Trades Handbook and Training Manual combine all the essentials of other reference books, plus so much more. Topics include pipe and tube data, valves, fittings, flanges and gaskets, offsets and calculations—the answers to all your questions. You’ll especially appreciate the pipe layout, piping prints, oxy-acetylene set-up, pipe welding and pipe rigging sections, which are easy to understand, yet extremely detailed

There are fire and explosion hazards inherent to working with and around flammable and combustible liquids and gases. NFPA 30A, Code for Motor Fuel Dispensing Facilities and Repair Garages, helps mitigate dangers by providing safety criteria for dispensing liquid motor fuels into motor vehicle and marine craft fuel tanks.

Starting with a thorough math review to ensure a solid foundation, the book progresses into specific on-the-job applications, such as pipe length calculations, sheet metal work, and the builder's level. Broad-based subjects like physics, volume, pressures, and capacities round out your student's skills, while a new chapter on the business of plumbing invites them to consider an exciting entrepreneurial venture. Written by a Master Plumber and experienced vocational educator, MATHEMATICS FOR PLUMBERS AND PIPEFITTERS, 8th Edition includes a wealth of real-world examples, reference tables, and formulas to help future plumbers and pipefitters equip their quantitative tool belts and build rewarding careers.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

Furthermore, it addresses specific provisions for low flammability refrigerants such as A2L and B2L; which makes it one of the first codes in the industry to address specific provisions for these low Global Warming Potential (GWP) refrigerants. Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/ testing laboratories, special experts and users.

The UMC provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies. Key changes to the 2021 UMC include:

• New Appendix F – Geothermal Energy Systems
• New guards and rails requirements for installation of equipment and appliances on roofs
• New ventilation requirements for transient and nontransient occupancies
• New ventilation requirements for indoor air quality for residential occupancies
• Revisions to the requirements for air ducts, including factory-made air ducts and dampers
• New provisions for factory-built grease ducts
• New provisions for refrigeration systems, including pressure-limiting devices and hydrostatic expansion
• Revisions to the sizing requirements for natural gas and propane piping systems
• Modifications to the pressure rating requirements for hydronic piping applications
• New requirements for fuel gas piping appliance shutoff valves, test pressure, and overpressure protection devices
• New tube fastener provisions for radiant heating and cooling
• New requirements for residential compressed natural gas (CNG) fueling systems
• New fire-extinguishing equipment and carbon monoxide detection requirements for exhaust systems

Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.

IPT’s Pipe Trades Handbook and Training Manual combine all the essentials of other reference books, plus so much more. Topics include pipe and tube data, valves, fittings, flanges and gaskets, offsets and calculations—the answers to all your questions. You’ll especially appreciate the pipe layout, piping prints, oxy-acetylene set-up, pipe welding and pipe rigging sections, which are easy to understand, yet extremely detailed

Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/testing laboratories, special experts and users.

The UPC is designed to provide consumers with safe and sanitary plumbing systems while, at the same time, allowing latitude for innovation and new technologies. Key changes to the 2021 UPC include:

• New Appendix N – Impact of Water Temperature on the Potential for Scalding and Legionella Growth
• New provisions for backflow prevention devices, assemblies, and methods
• New provision of temperature limiting devices
• New guard and rail requirements for appliances on roofs and platforms
• New requirements for the discharge of temperature and pressure relief valve piping
• New provision on leak detection devices
• Provisions for potable water pumps
• New standards for drain, waste, and vent pipe and fittings
• New provisions for drain waste and vent cleanouts
• Circuit vent provisions have been updated and expanded
• Updated to fuel gas provisions
• Updated medical gas provisions including reordering of categories for ease of use

Furthermore, it addresses specific provisions for low flammability refrigerants such as A2L and B2L; which makes it one of the first codes in the industry to address specific provisions for these low Global Warming Potential (GWP) refrigerants. Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/ testing laboratories, special experts and users.

The UMC provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies. Key changes to the 2021 UMC include:

• New Appendix F – Geothermal Energy Systems
• New guards and rails requirements for installation of equipment and appliances on roofs
• New ventilation requirements for transient and nontransient occupancies
• New ventilation requirements for indoor air quality for residential occupancies
• Revisions to the requirements for air ducts, including factory-made air ducts and dampers
• New provisions for factory-built grease ducts
• New provisions for refrigeration systems, including pressure-limiting devices and hydrostatic expansion
• Revisions to the sizing requirements for natural gas and propane piping systems
• Modifications to the pressure rating requirements for hydronic piping applications
• New requirements for fuel gas piping appliance shutoff valves, test pressure, and overpressure protection devices
• New tube fastener provisions for radiant heating and cooling
• New requirements for residential compressed natural gas (CNG) fueling systems
• New fire-extinguishing equipment and carbon monoxide detection requirements for exhaust systems

Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.

IPT’s Pipe Trades Handbook and Training Manual combine all the essentials of other reference books, plus so much more. Topics include pipe and tube data, valves, fittings, flanges and gaskets, offsets and calculations—the answers to all your questions. You’ll especially appreciate the pipe layout, piping prints, oxy-acetylene set-up, pipe welding and pipe rigging sections, which are easy to understand, yet extremely detailed

Uses:

• Sizes metal ducts, lined metal ducts duct board airways, and wire helix flexible ducts.
• Converts round shapes to equivalent rectangles.
• Correlates available pressure with total effective length and friction rate (Manual D sizing calculations).
• Converts velocity into velocity pressure and vice versa.
• Corrects for altitude and temperature

Building on a history of duct construction standards nearly 100 years old, the flagship SMACNA HVAC Duct Construction Standard – Metal & Flexible 4th edition represents the state of the art in the sheet metal duct fabrication and installation requirements. Significant changes for the 4th edition include; flat oval tables for positive/negative pressure applications; spray and aerosolized duct sealants; non-fiberglass duct liner applications; added information on spiral duct fittings; updates to duct hanger requirements; flexible duct hanger spacing and support bracing.

Sheet Metal covers the layout, cutting, forming, and fabrication of sheet metal. This text/workbook presents basic metalworking principles and builds on this knowledge from chapter to chapter. Large two-color illustrations and photographs reinforce key concepts.

Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.

Furthermore, it addresses specific provisions for low flammability refrigerants such as A2L and B2L; which makes it one of the first codes in the industry to address specific provisions for these low Global Warming Potential (GWP) refrigerants. Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/ testing laboratories, special experts and users.

The UMC provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies. Key changes to the 2021 UMC include:

• New Appendix F – Geothermal Energy Systems
• New guards and rails requirements for installation of equipment and appliances on roofs
• New ventilation requirements for transient and nontransient occupancies
• New ventilation requirements for indoor air quality for residential occupancies
• Revisions to the requirements for air ducts, including factory-made air ducts and dampers
• New provisions for factory-built grease ducts
• New provisions for refrigeration systems, including pressure-limiting devices and hydrostatic expansion
• Revisions to the sizing requirements for natural gas and propane piping systems
• Modifications to the pressure rating requirements for hydronic piping applications
• New requirements for fuel gas piping appliance shutoff valves, test pressure, and overpressure protection devices
• New tube fastener provisions for radiant heating and cooling
• New requirements for residential compressed natural gas (CNG) fueling systems
• New fire-extinguishing equipment and carbon monoxide detection requirements for exhaust systems

Long considered the benchmark for automatic fire sprinkler systems, NFPA 13 presents consensus-based requirements for sprinkler system design approaches, installation, and component options. Compliance is essential to sprinkler performance, which in turn significantly reduces the risks of fire deaths and property loss. Each new edition of NFPA 13 reflects added knowledge about sprinkler performance under fire conditions. Changes are based on scientific research and a wide body of industry experience.

This standard includes the minimum requirements to ensure that dry chemical fire extinguishing systems will function as intended throughout their life to protect life and property from fire. It is intended for the use and guidance of those who purchase, design, install, test, inspect, approve, list, operate, or maintain such equipment.

IPT’s Pipe Trades Handbook and Training Manual combine all the essentials of other reference books, plus so much more. Topics include pipe and tube data, valves, fittings, flanges and gaskets, offsets and calculations—the answers to all your questions. You’ll especially appreciate the pipe layout, piping prints, oxy-acetylene set-up, pipe welding and pipe rigging sections, which are easy to understand, yet extremely detailed

Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/testing laboratories, special experts and users.

The UPC is designed to provide consumers with safe and sanitary plumbing systems while, at the same time, allowing latitude for innovation and new technologies. Key changes to the 2021 UPC include:

• New Appendix N – Impact of Water Temperature on the Potential for Scalding and Legionella Growth
• New provisions for backflow prevention devices, assemblies, and methods
• New provision of temperature limiting devices
• New guard and rail requirements for appliances on roofs and platforms
• New requirements for the discharge of temperature and pressure relief valve piping
• New provision on leak detection devices
• Provisions for potable water pumps
• New standards for drain, waste, and vent pipe and fittings
• New provisions for drain waste and vent cleanouts
• Circuit vent provisions have been updated and expanded
• Updated to fuel gas provisions
• Updated medical gas provisions including reordering of categories for ease of use

Low Pressure Boilers is the leading resource for preparing for low pressure boiler operator and facility operating engineer licensing. This textbook provides a comprehensive overview of the latest information on the safe and efficient operation of low pressure steam and hot water boilers, cooling systems, and related equipment. Each chapter is divided into sections to aid comprehension of key concepts. To assist with preparing for a licensing exam, a separate chapter with test-taking tips and a sample exam is included.

NFPA 31 is a standard for the safe, efficient design and installation of heating appliances that use a liquid fuel, typically No. 2 heating oil, but also lighter fuels, such as kerosene and diesel fuel, and heavier fuels, such as No. 4 fuel oil. NFPA 31 applies to the installation of these systems in residential, commercial, and industrial occupancies.

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections.

Custom Tab Bundle, please specify which books these tabs should reference at checkout

Custom Tab Bundle, please specify which books these tabs should reference at checkout

Custom Tab Bundle, please specify which books these tabs should reference at checkout

Custom Tab Bundle, please specify which books these tabs should reference at checkout