Construction

**Special Order** Currently out of print

The 2015 edition of the Uniform Plumbing Code (UPC©) represents the most current approaches in the plumbing field. It is the fifth edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI).

Part A, Part B, Part C, Part D, Part E, of the Massachusetts Architectural Access Board 521 CMR.

Ninth Edition of the Massachusetts State Building Code - Basic/Commercial version which is comprised of the Massachusetts amendments to the International Building Code 2015.

Ninth Edition of the Massachusetts State Building Code - Residential version which is comprised of the Massachusetts amendments to the International Residential Code 2015.

General Provisions Governing the Conduct of Plumbing and Gas Work Performed in the Commonwealth; Massachusetts Fuel Gas Code; Amendments to NFPA 54; Large Gas Utilization Equipment; Amendments to NFPA 58; Uniform State Plumbing Code; Education & Experience Standards & Requirements for Licensure.

The 2018 edition of the Uniform Plumbing Code (UPC©) represents the most current approaches in the plumbing field. It is the sixth edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI).

The 2021 edition of the Uniform Plumbing Code (UPC®) represents the most current approaches in the plumbing field. It is the seventh edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI).

The 2018 edition of the Uniform Mechanical Code (UMC©) represents the most current approaches in the mechanical field. It is the sixth edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI).

The 2021 edition of the Uniform Mechanical Code (UMC®) represents the most current approaches in the mechanical field. It is the seventh edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI).

***Not necessary or recommended for the exam.*** ANSI/EIMA 99A – 2017 embodies the minimum requirements for specifying and installing Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage. The generic materials, details, and design considerations for EIFS and EIFS with Drainage are described in this standard. For specifications, application instructions, and details specific to a particular EIF System, consult the EIFS manufacturer’s product literature. In addition, care has been taken to incorporate the reference documents that constitute provisions of this American National Standard. The Annex contained in this standard is considered part of the standard.

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections: Part 1 focuses on planning and starting your business. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills. Part 2 Covers fundamentals you will need to know in order to operate a successful construction business. This section covers estimating, contract management, scheduling, project management, safety and environmental responsibilities, and building good relationships with employees, subcontractors, and customers. Part 3 provides valuable information to assist you in running the administrative functions of your business. Financial management, tax basics, and lien laws are covered. Effective management of these areas of business is vital and can cause you serious problems if you do not give them proper attention.

With a one-of-a-kind approach that offers more comprehensive coverage than any other plumbing apprentice book on the market, this valuable resource will thoroughly prepare readers for the transition from the residential plumbing industry to commercial or industrial projects.

Walker’s Building Estimator’s Reference Book is the single most important resource you can own. It gives you the tools you need to work up your own costs per job. With Walker’s, you get material quantities and labor productivity for your job based on your job conditions – that’s the kind of flexibility and reliability no computer program or unit price catalog can provide. For accurate building costs, turn to the source that construction professionals have relied on since 1915.

This revised manual addresses three new areas: 1. Hydronic heating systems 2. Multistory HVAC systems 3. Residential commissioning Appendix chapters provide overviews of methods for including crawlspaces in the conditioned space and the HVAC accessories, such as UV lights, zoning, and advanced air filtering methods to enhance indoor environmental quality (IEQ) for occupants. More detailed information and new concepts are induded for earth energy heat exchanger methods for ground source heat pumps. Updated construction code requirements are reflected throughout the range of HVAC system types, along with energy efficiency and sustainable practices. Installation, operation, maintenance, and guidance for residential heating, ventilation and air conditioning systems are also included.

This timely document provides an overview of a variety of energy-related business opportunities for commercial, residential, and institutional buildings. Presents contractors, building owners and operators, facility managers, and system designers with the tools needed to evaluate an existing facility for energy savings potential.

The updated 88-page manual provides the performance characteristics for fibrous glass board as determined by the North American Insulation Manufacturers’ Association (NAIMA) and Underwriters Laboratories (UL) as well as specifications for closures and illustrations of how to construct the full range of fittings.

This completely revised publication contains the most comprehensive set of recommended practices available for proper design and installation of custom-fabricated architectural sheet metal including roof drainage system design for scuppers, gutters and downspouts. Features more details in the historical restoration section on skylights, cornices and spires; new moisture and maintenance guide with underlayments; mechanical fasteners and soldering guidance; and enhanced metals selection data. Offers new construction techniques and alternative methods of design and installation reflecting climatic conditions and rainfall rates. An upfront, fast “look-up” key speeds information retrieval. Also covers flashing, metal roofs, copings, gravel-stop fascia. Includes wind uplift pressure test reports confirming superior performance of custom-fabricated metal roofing. Applies to commercial, industrial and residential buildings.

Prepared for the Nevada Construction Business and Law Exam as a study guide and open book reference. The general business and law exam is open book and this book is allowed to be taken with you when you sit for the exam.

This is the Builders Technical Supplement listed in the Candidate Information Bulletin. This reference material is allowed in the examination room and was used to prepare questions for this examination.

This text is a complete, practical guide to servicing and repairing heating, cooling, and refrigeration equipment. It provides the information needed to make a quick diagnosis and repair. This guide first examines the conditions for ideal equipment operation, then proceeds to common and not-so-common malfunctions. This handbook, with its easy-to-follow, step-by-step guidelines, is a must for modern technicians.

Selections as of June 2013. Published by PSI Copyright: 2013

The NASCLA Contractors Guide to Business, Law and Project Management is organized into 3 sections. - Part 1 focuses on business planning and start up. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills. - Part 2 is centered on fundamentals that you will need to operate a successful construction business. This section will cover estimating, contract management, scheduling, project management, safety and environmental responsibilities and building good relationships with employees, subcontractors and customers. - Part 3 gives you valuable information for running the administrative function of your business. Financial management, tax basics and lien laws are covered. Effective management of these areas of business is vital and can cause you serious problems if you do not give them the proper attention.

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections. - Part 1 Focuses on planning and starting your business. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills. - Part 2 Covers fundamentals you will need to know in order to operate a successful construction business. This section covers estimating, contract management, scheduling, project management, safety and environmental responsibilities and building good relationships with employees, subcontractors and customers. - Part 3 Provides valuable information to assist you in running the administrative function of your business. Financial management, tax basics, and lien laws are covered. Effective management of these areas of business is vital and failure proper attention can cause serious problems.