Construction

The 2015 edition of the Uniform Plumbing Code (UPC©) represents the most current approaches in the plumbing field. It is the fifth edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI).

**Special Order** The 2017 ASHRAE Handbook-Fundamentals covers basic principles and data used in the HVAC&R industry. Its more than 1,000 pages cover basic principles such as thermodynamics, psychrometrics, and heat transfer, and provide practical guidance on building envelope, indoor environmental quality, load calculations, duct and piping system design, refrigerants, energy resources, sustainability, and more.

The Florida Building Code (2017) is the most complete source of code standards and compliance information in the construction industry. It is arguably the single-most important book in the construction industry since it defines the standards with which construction products and installations must comply throughout the construction process.

Loose-leaf copy of the 2017 Florida Building Code - Accessibility 6th Edition

This is a fully integrated code based on the 2015 IEBC. Florida Building Code Administrative Chapter 1 is included. Chapter tabs are also included. Loose-leaf copy

This is a fully integrated code based on the 2015 IMC. Florida Building Code Administrative Chapter 1 is included. Chapter tabs are also included.

This is a fully integrated code based on the 2015 International Mechanical Code®.

**Special Order** The 2017 Edition of the Oregon Plumbing Specialty Code (OPSC) represents a custom plumbing code published for the state. This code is based on the 2015 Uniform Plumbing Code (UPC) and updated with recent 2017 Oregon amendments.

The scope of the International Building Code® (IBC®) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories.

The IECC addresses energy efficiency on several fronts including cost savings, reduced energy usage, conservation of natural resources and the impact of energy usage on the environment.

Addresses the design and installation of fuel gas systems and gas fired appliances through prescriptive and performance requirements.

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design.

The IPC provides minimum regulations for plumbing facilities in terms of both performance and prescriptive objectives, and provides for the acceptance of new and innovative products, materials, and systems.

This comprehensive code comprises all building, plumbing, mechanical, fuel gas and electrical requirements for one- and two-family dwellings and townhouses up to three stories.

**Special Order** The 2018 edition of the North Dakota Plumbing Code (NDPC) is the first custom plumbing code published for the state of North Dakota and represents the most current approaches in the plumbing field.

The 2018 edition of the Uniform Mechanical Code (UMC©) represents the most current approaches in the mechanical field. It is the sixth edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI).

The 2018 edition of the Uniform Plumbing Code (UPC©) represents the most current approaches in the plumbing field. It is the sixth edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI).

**Special Order** This hard-copy version contains the code-recognized 2018 National Design Specification (NDS) for Wood Construction and Commentary with 2018 Supplement: Design Values for Wood Construction along with the 2015 Special Design Provisions for Wind and Seismic (SDPWS) with Commentary.

**Special Order** The California Building Code (CBC) contains general building design and construction requirements relating to fire and life safety, structural safety, and access compliance. CBC provisions provide minimum standards to safeguard life or limb, health, property, and public welfare by regulating and controlling the design, construction, quality of materials, use and occupancy, location, and maintenance of all buildings and structures and certain equipment.

This code applies to all buildings except detached one- and two-family dwellings and townhouses up to three stories.

The 2021 IECC® addresses energy efficiency on several fronts including cost, energy usage, use of natural resources and the impact of energy usage on the environment.

Addresses the design and installation of fuel gas systems and gas fired appliances through prescriptive and performance requirements.