South Carolina Limited Building Contractor License

The 2021 IBC® contains many important changes such as:

• Puzzle rooms (escape rooms) are now defined and regulated as special amusement areas, requiring compliance with Section 411 and special means of egress requirements.
• For the purposes of determining the allowable number of control areas in a building, each portion separated by one or more fire walls is now considered as a separate building.
• In Group E occupancies, enhanced classroom acoustics in compliance with ICC A117.1 are to be provided in all classrooms having of volume of 20,000 cubic feet or less.
• The requirements for metal composite materials and systems (MCM) installed on the exterior walls of Types I, II, III and IV construction were simplified and sprinkler allowances were deleted.
• The use of intermodal shipping containers as buildings is now specifically addressed through provisions intended to supplement existing applicable IBC requirements.
• Automatic sprinkler protection is now required in Group S-2 open parking garages where any fire area exceeds 48,000 square feet.
• The 2017 edition of ICC A117.1 was adopted.
• Parapets of a minimum height are now required for aggregate-surfaced roofs to prevent blow-off.
• Mixed occupancy buildings with assembly spaces are placed in Risk Category III when the total public assembly occupant load is greater than 2500 people.
• The 2021 IBC snow map is updated to match ASCE 7-16 snow maps by adding a reference to ASCE 7 snow tables in states with large case study areas.
• Secondary rain loads are updated to be consistent with ASCE 7.
• Special inspection requirements were added to address the anchorage and connection of mass timber structural elements.
• Installation of firestop, fire-resistant joint systems and perimeter fire barrier systems in residential-use buildings now requires special inspection in Group R fire areas having an occupant load exceeding 250 people.
• Frost protection for egress doors was added to the foundation requirements.
• ACI standards ACI 117 and ITG 7 were added by reference to provide acceptable tolerances for concrete construction.
• Three new types of construction (Types IV-A, IV-B, and IV-C) allow mass timber buildings of taller heights, more stories above grade, and greater allowable areas compared to existing provisions for heavy timber buildings.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

Code features reference the International Residential Code and International Building Code, familiarizing students with their requirements. Updated, color images have been added throughout the text to reinforce chapter topics. Over 75 illustrated step-by-step procedures guide student learning.

The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturers plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are panelized erection and common field issues.

This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9.

General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

Includes hardbound student edition aligned to the content standards.

Installation, repair and estimating for nearly every type of roof covering available today in residential and commercial structures: asphalt shingles, roll roofing, wood shingles and shakes, clay tile, slate, metal, built-up, and elastomeric. Covers sheathing and underlayment techniques, as well as secrets for installing leakproof valleys. Many estimating tips help you minimize waste, as well as insure a profit on every job. Troubleshooting techniques help you identify the true source of most leaks.

This document is published jointly by the American Concrete Institute (ACI) and the American Society of Concrete Contractors (ASCC). It has been reviewed in accordance with the Educational Committee Manual document review procedures of the ACI Educational Activities Committee. ACI and ASCC reports are intended for guidance in planning, designing, executing, and inspecting construction. This document is intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains. A summary, review questions, and additional recommended reading list accompany each of the 12 chapters.

Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

Learn how to find the right kind of work, read and compute quantities from the plans, figure realistic crew and equipment productivity rates, consider job variables, calculate your O & P, then estimate and bid the job, and get the bonds you need. Also, how to deal with change orders and liquidated damages, choosing the right equipment, and handling safety issues.

When it comes to doing the actual work, you ll find the combined expertise of two long-time professionals, explaining how to follow and read the surveyor s reference stakes; how to check grade and line with an optical level, transit and pipe laser, and how to use GPS systems. See the best ways to clear the site, including asphalt and rock; handle rock, steep slopes and high groundwater; meet compaction requirements; install septic tanks and drain fields; all common types of water and sewer pipe, and how to do subsurface excavation.

Custom Tab Bundle, please specify which books these tabs should reference at checkout