Nevada C-1 Plumbing and Heating - Online Exam Prep
Included in the bundle
Lifetime Online Access to:
- Nevada C-1 Plumbing and Heating - Online Exam Prep
Our online exam prep features:
Ideal for students who already own all references
$299
Nevada C-1 Plumbing and Heating Exam Bundle
Includes the following:
- Nevada C-1 Plumbing and Heating Online Exam Prep
- All the books to use during the exam
Plus the following:
- Permanent/Pre-Printed Tabs
- Free Shipping!
- Instructor Support
- No Pass No Pay Policy
- Lifetime Access from nearly any device
The Following References are Allowed to be Used During the Exam:
Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/ testing laboratories, special experts and users.
The UPC is designed to provide consumers with safe and sanitary plumbing systems while, at the same time, allowing latitude for innovation and new technologies. Key changes to the 2018 UPC include:
- New sound transmission provisions for plumbing piping systems (Chapter 3)
- New product standards for plumbing fixtures such as wall hung fixtures, waste fittings, lavatories, showers, bathtubs and whirlpool bathtubs, flushometer valves, sinks and eyewash stations; and signage for single use toilet facilities (Chapter 4)
- New provisions for connector capacities for elbows in connectors, minimum capacity for storage water heaters and clearance to combustible materials (Chapter 5)
- New backflow protection provisions for chemical dispensers, new material provisions for pipes, tubes, fittings and joint methods for water supply and distribution, and new pressure testing for the hot and cold-water supply system (Chapter 6)
- New materials requirements for drain, waste, vent pipe and fittings (Chapter 7)
- New provisions for trap seal primers for potable water supply (Chapter 10)
- New provisions for engineered storm drainage systems (Chapter 11)
- New requirements for piping material, overpressure protection and gas piping installation for fuel gas piping systems (Chapter 12)
- New requirements for medical gas and vacuum systems based on latest edition of NFPA 99 (Chapter 13)
- New peak water demand method and calculator for estimating demand loads for water supply of single- and multi-family dwellings with water conserving plumbing fixtures, fixture fittings, and appliances (Appendix M)
The 2018 edition of the UMC reached a major milestone as it addresses specific provisions for low flammability refrigerants such as A2L and B2L; which makes it one of the first codes in the industry to address specific provisions for these low Global Warming Potential (GWP) refrigerants. Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/ testing laboratories, special experts and users.
The UMC provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies. Key changes to the 2018 UMC include:
- New clearance requirements for solid-fuel burning appliances, ducts serving Type I hood exhaust system, and product conveying ducts (Chapter 3)
- New provisions for Type I and Type II exhaust systems and product conveying ducts.
- New sizing provisions for duct systems, duct leakage testing requirements, installations and closure requirements for flexible air ducts, and new provisions for air dispersions systems (Chapter 6)
- New requirements for pressure regulators and electric furnaces (Chapter 9)
- New refrigerant system requirements, such as A2L and B2L low flammability refrigerants; machinery room requirements such as access, openings, detectors, and ventilation systems; and new pressure limiting-device provisions for compressors (Chapter 11)
- New pressure testing requirements for piping and components, expansion tanks, and materials for hydronic systems (Chapter 12)
- New requirements for piping material, overpressure protection and gas piping installation for fuel gas piping systems (Chapter 13)
NFPA 54: Standard for National Fuel Gas Code, 2012
See Details
**Special Order**
From carbon monoxide poisoning to the risks of fire and explosion, there are many hazards inherent with the utilization of gaseous fuels. NFPA 54 offers comprehensive provisions for the safe design, installation, operation, maintenance, purging, and inspection of gas piping, equipment, accessories, and appliances supplied with fuel gas.
NFPA 58: Standard for Liquid Petroleum Gas Code, 2014
See Details
NFPA 58: Liquefied Petroleum Gas Code provides minimum safety requirements for all liquefied petroleum gas (propane) installations, from small cylinders installed at residences to large bulk storage facilities that can exceed 100,000 gallons. The code includes minimum requirements for safe handling during LP gas transfer, including operator qualifications, maximum filling quantity in containers, and pre-transfer inspections to ensure containers are fit for continued service.
NFPA 13: Standard for the Installation of Sprinkler Systems, 2019
See Details
The industry benchmark for design and installation of automatic fire sprinkler systems, NFPA 13 addresses sprinkler system design approaches, system installation, and component options to prevent fire deaths and property loss.
The Following References are NOT Allowed to be Used During the Exam:
Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.
This book features:
• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces
Modern Hydronic Heating: For Residential and Light Commercial Buildings, 4th Ed.
See Details
From simple applications to multi-load and multi-temperature systems, this one-of-a-kind, comprehensive text prepares readers to use the latest hydronics to create systems that deliver the ultimate in comfort, reliability and energy efficiency. Abundantly illustrated with product and installation photos and hundreds of detailed, full-color schematics, MODERN HYDRONIC HEATING, Fourth Edition, transforms engineering-level design information into practical applications useful for technical students and heating professionals alike. The revised edition features the latest design and installation techniques for residential and light commercial hydronic systems, including use of renewable energy heat sources such as air-to-water and geothermal heat pumps, hydraulic separation, variable speed circulators, distribution efficiency, heat exchangers, buffer tanks, heat metering, hydronic cooling, system balancing and proper system documentation. Anyone involved in the heating trade will benefit from this preeminent resource of the North American heating industry, which is equally well-suited for formal education courses, self-study or on-the-job reference.
Starting with a thorough math review to ensure a solid foundation, the book progresses into specific on-the-job applications, such as pipe length calculations, sheet metal work, and the builder's level. Broad-based subjects like physics, volume, pressures, and capacities round out your student's skills, while a new chapter on the business of plumbing invites them to consider an exciting entrepreneurial venture. Written by a Master Plumber and experienced vocational educator, MATHEMATICS FOR PLUMBERS AND PIPEFITTERS, 8th Edition includes a wealth of real-world examples, reference tables, and formulas to help future plumbers and pipefitters equip their quantitative toolbelts and build rewarding careers.
Modern Refrigeration and Air Conditioning, 21st Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.
**Special Order**
Modern Welding is a comprehensive text that has long been the standard for teaching theory, fundamentals, equipment, and techniques of welding technology. This text provides thorough coverage of common welding and cutting processes, including gas tungsten arc welding, gas metal arc welding, flux-cored arc welding, shielded metal arc welding, oxyfuel gas welding and cutting, plasma arc cutting, and resistance welding of ferrous and non-ferrous metals.
Facility Piping Systems Handbook: For Industrial, Commercial, and Healthcare Facilities
See Details
**Special Order**
Fully up-to-date with the latest codes and standards, this practical resource contains everything you need to plan, select, design, specify, and test piping systems for industry, commercial, and institutional applications. The book includes complete coverage of pipes, fittings, valves, jointing methods, hangers, supports, pumps, tanks, and other required equipment.
**Special Order**
The intent of this manual is to equip the reader with the knowledge and skills needed to design, install, operate and maintain the most common types of solar water heating systems. Use this manual for the Florida Solar Contractor test.
Pre-printed or blank tabs are also available.
Custom Tab Bundle, please specify which books these tabs should reference at checkout