HVAC

**Special Order** Created with a clear-cut vision of necessary knowledge, this groundbreaking text provides comprehensive coverage of heating, ventilating, air conditioning, and refrigeration. Lauded as a reader-friendly text that delivers fundamental concepts, the most current trends, and practical applications with simple language and skillfully presented concepts, Fundamentals of HVACR, 2nd edition boasts carefully selected artwork and the right amount of detail.

**Special Order** NFPA 54, National Fuel Gas Code provides industry-accepted guidance for the safe installation and operation of fuel gas piping systems, appliances, equipment, and accessories. The 2018 edition includes updates based on recognized risks, recent research, and the techniques, materials, developments, and construction practices in use today.

**Older editions are no longer in print** In the event of a fire emergency, fire, smoke, and gases can quickly spread through heating, ventilation, and air-conditioning (HVAC) systems, elevating the risk of injury and loss. NFPA 90B, Standard for the Installation of Warm Air Heating and Air-Conditioning Systems, provides complete provisions for the construction, installation, operation, and maintenance of HVAC equipment, including filters, ducts, and related components.

**Older editions are no longer in print** The NFPA 90A: Installation of Air-Conditioning and Ventilating Systems is essential for providing adequate fire protection in today's buildings. Use the industry-approved standard of care for HVAC to protect life and property from fire, smoke, and gases resulting from fire or similar conditions.

**Special Order** Advancing rapidly from basic concepts and processes to today’s most complex, cutting-edge welding technologies and practices, this comprehensive text features valuable information on topics such as welding metallurgy, metal fabrication, weld testing and inspection, joint design, job costing, and environmental and conservation tips.

**Special Order** The 2015 NFPA 54: National Fuel Gas Code includes updates based on recognized risks, recent research, and the techniques, materials, developments, and construction practices in use today. From design to installation, maintenance, and inspection.

**Special Order** The 2021 ASHRAE Handbook--Fundamentals covers basic principles and data used in the HVAC&R industry. Its more than 1,000 pages cover basic principles such as thermodynamics, psychrometrics, and heat transfer, and provide practical guidance on building envelope, indoor environmental quality, load calculations, duct and piping system design, refrigerants, energy resources, sustainability, a new chapter on climate change, and more. Climate data for over 9000 weather stations worldwide are provided as a separate download (approximately 700 MB zip file).

**Special Order** This manual takes contractors through the design stage to the completion of a successful residential heating and cooling system installation. The whole house concept of Manual RS includes special design elements that match the needs of today's homeowners.

**Special Order** Manual P shows you how to use the psychrometric chart to map any type of heating and cooling process, and how to use these maps to calculate heating, cooling, humidification, and loads. Includes sample problems and solutions for sensible heating and sensible cooling processes, humidification and dehumidification processes, room-sensible heat ratio and coil-sensible heat ratio.

**Special Order** The LP-Gas Code is your source for the latest requirements for LP-gas installations, including container construction, piping design, and separation of containers from homes, stores, schools, and other buildings. The code also provides comprehensive coverage of handling LP-Gas during transfer and storage, including operator qualifications, maximum filling quantity in containers, and pre-transfer inspections to ensure containers are fit for continued service.

MJ8AE, an abridged version of the Eighth Edition of Manual J, provides complete instructions for estimating heat loss and heat gain for residential structures. MJ8AE is sufficient for learning the Manual J procedures and for undertaking hand calculations on a varied number of home applications.

OUT OF PRINT - NOT AVAILABLE

*Out of Stock, Only Available in Bundle* Equip your students with the knowledge and skills to maintain and troubleshoot complex heating, air conditioning, and refrigeration systems with REFRIGERATION & AIR CONDITIONING TECHNOLOGY, Ninth Edition

This text is a complete, practical guide to servicing and repairing heating, cooling, and refrigeration equipment. It provides the information needed to make a quick diagnosis and repair. This guide first examines the conditions for ideal equipment operation, then proceeds to common and not-so-common malfunctions. This handbook, with its easy-to-follow, step-by-step guidelines, is a must for modern technicians.

This completely revised publication contains the most comprehensive set of recommended practices available for proper design and installation of custom-fabricated architectural sheet metal including roof drainage system design for scuppers, gutters and downspouts. Features more details in the historical restoration section on skylights, cornices and spires; new moisture and maintenance guide with underlayments; mechanical fasteners and soldering guidance; and enhanced metals selection data. Offers new construction techniques and alternative methods of design and installation reflecting climatic conditions and rainfall rates. An upfront, fast “look-up” key speeds information retrieval. Also covers flashing, metal roofs, copings, gravel-stop fascia. Includes wind uplift pressure test reports confirming superior performance of custom-fabricated metal roofing. Applies to commercial, industrial and residential buildings.

The updated 88-page manual provides the performance characteristics for fibrous glass board as determined by the North American Insulation Manufacturers’ Association (NAIMA) and Underwriters Laboratories (UL) as well as specifications for closures and illustrations of how to construct the full range of fittings.

This timely document provides an overview of a variety of energy-related business opportunities for commercial, residential, and institutional buildings. Presents contractors, building owners and operators, facility managers, and system designers with the tools needed to evaluate an existing facility for energy savings potential.

This revised manual addresses three new areas: 1. Hydronic heating systems 2. Multistory HVAC systems 3. Residential commissioning Appendix chapters provide overviews of methods for including crawlspaces in the conditioned space and the HVAC accessories, such as UV lights, zoning, and advanced air filtering methods to enhance indoor environmental quality (IEQ) for occupants. More detailed information and new concepts are induded for earth energy heat exchanger methods for ground source heat pumps. Updated construction code requirements are reflected throughout the range of HVAC system types, along with energy efficiency and sustainable practices. Installation, operation, maintenance, and guidance for residential heating, ventilation and air conditioning systems are also included.

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. First introduced in 1996, the IMC was developed with broad-based principles that make possible the use of new materials, methods and design.

The 2021 edition of the Uniform Mechanical Code (UMC®) represents the most current approaches in the mechanical field. It is the seventh edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI). The UMC provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies.

The 2018 edition of the Uniform Mechanical Code (UMC©) represents the most current approaches in the mechanical field. It is the sixth edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI). The UMC provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies.

HVAC Basics for Contractors is an important reference for some Prov Air Conditioning Exams.

Building on a history of duct construction standards nearly 100 years old, the flagship SMACNA HVAC Duct Construction Standard – Metal & Flexible 4th edition represents the state of the art in the sheet metal duct fabrication and installation requirements. Significant changes for the 4th edition include; flat oval tables for positive/negative pressure applications; spray and aerosolized duct sealants; non-fiberglass duct liner applications; added information on spiral duct fittings; updates to duct hanger requirements; flexible duct hanger spacing and support bracing.

This set of the Carrier System Design Manuals comes in 3 parts: Volume 1 - Load Estimating Volume 2 - Air Distribution Volume 3 - Piping Design