Georgia Electrical License & Exam Prep

The new edition of the best-known reference for electricians―fully updated for the latest codes and standards

For over a century, this practical handbook has served as the definitive industry reference for information on designing, installing, operating, and maintaining electrical systems and equipment. This seventeenth edition has been thoroughly revised to comply with the most recent (2020) National Electrical Code and National Electrical Safety Code. 

American Electricians’ Handbook, 17th Edition, covers current energy-efficient technologies, such as Power over Ethernet (PoE), photovoltaics and induction lighting, and contains a new chapter that clearly explains new industry safety methods, along with detailed coverage of how those procedures correlate with OSHA requirements. Detailed photos, diagrams, charts, tables, and calculations are included. This is a practical, on-the-job resource for every professional electrician. 

Covers:

• Fundamentals
• Properties and splicing conductors
• Circuits and circuit calculations
• General electrical and batteries
• Transformers
• Solid-state devices and circuits
• Generators and Motors
• Outside Distribution
• Interiors wiring
• Electric lighting
• Optical fiber
• Wiring and design tables
• Electrical safety

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections.

Prepare for the electrical challenges of tomorrow, today, with NFPA 70, National Electrical Code (NEC), 2020 edition.

The world never stops changing, so it's crucial to keep learning how to keep it safe. Incorporated by reference in all 50 states and used across the globe, NFPA 70®, National Electrical Code® (NEC®), is the benchmark standard for electrical safety in residential, commercial, and industrial settings.

NFPA 70, NEC, was first published in 1897 and is continually put through a rigorous review process to keep it up to date with the most current industry practices, emerging trends, and the development and introduction of new technologies. The new NEC provides the latest requirements for safer and more effective electrical design, installation, and inspection, including provisions for wiring, overcurrent protection, grounding, and equipment.

Get up-to-code and prepared for the safety challenges of new sources of electrical power with the NEC, 2020 edition.

The revised and expanded NFPA 70, National Electrical Code, features state-of-the-art information for safe electrical practices for public and private buildings, homes and structures, outdoor yards and lots, utility equipment, installations that connect to the power grid, and consumer-owned power generation systems and equipment.

Content has been added, edited, and reorganized to address safety for workers, energy systems and electric vehicles, limited energy, and communication systems.

Impactful changes include:

• New requirements for exterior emergency disconnects of one- and two-family dwellings for improved electrical safety for emergency responders
• Revisions to service disconnect rules to help protect electrical workers from arc flash hazards
• Adapted and adjusted requirements for installation practices of new technologies to meet the evolving demand of power over Ethernet
• Updates to modernize tables currently in use for calculations to reflect improvements in energy efficiency and align with evolving codes
• Revised requirements for ground-fault protection within marinas and boatyards
• Introduction of guidelines for the safe use of electric vehicles (electric vehicle power export equipment) as a backup or emergency power source for a building or a home
• Reorganization of Article 310, including new user-friendly numbering for important ampacity tables, and new definition for cable bundle in Article 725
• Relocation of surge protection device requirements to new Article 242
• Revisions to alternative energy systems and electric vehicle requirements to clarify what portions of the PV system are covered by the requirements of Article 690 and the line side and load side connections of interconnected power supply sources, and to clearly distinguish energy storage systems from storage battery systems
• Reorganization of Article 800 to provide a general set of requirements to apply throughout the Chapter 8 articles
• Revisions to requirements for communications cables that are also carrying power to communication devices and revisions to the current limit for cables carrying power and data

The NEC, 2020 edition, introduces significant new requirements for:

• The residential installation of receptacle outlets serving island and peninsular countertops and for surge protection of services supplying dwelling units
• Working space for “housekeeping pads” for electrical equipment, the installation of wiring methods in exit enclosures, sizing supply and load conductors used with adjustable-speed drive systems, and AFCI protection of branch circuits in patient sleeping areas in care facilities
• Calculating the load of electric vehicle supply equipment with variable current settings
• Worker safety in identifying the source of power for disconnecting means and for egress from spaces containing large electrical equipment
• Grounding of disconnecting means installed on the supply-side of service disconnecting means
• Cables installed exposed on ceiling surfaces and sidewalls
• Special occupancies, special equipment, and special conditions, including installation of splash pads, the use of “Type P” cables in hazardous classified locations, and the reinspection of swimming pools and other bodies of water

Help protect life and property with the most relevant electrical requirements.

Get the cutting edge information you need to identify and overcome the latest hazards and complexities in electrical work. Order your copy of NFPA 70®, National Electrical Code, 2020 edition, today.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

Printreading Based on the 2017 NEC® provides a thorough foundation for understanding drawings and concepts related to electrical printreading and includes important changes that appear in the 2017 National Electrical Code® as they pertain to one-family dwellings, multifamily dwellings, commercial locations, industrial locations, special equipment, and hazardous locations. Electrical plans are used in conjunction with NEC® requirements to familiarize the learner with standards that promote best practices. This informative and full color textbook serves as both an instructional tool and a valuable technical reference for professionals in the field.

Features of this textbook include the following:

• A new chapter on printreading applications that discusses, in detail, the electrical prints for a distinctive residential building
• New electrical plans for a veterinarian center and a hospital energy center that help build commercial and industrial printreading skills
• Printreading Tests based on NEC® standards and prints in the textbook to assess learner comprehension
• Trade Competency Tests that provide a thorough review of the content covered in each chapter

Ugly’s Electrical References, 2020 Edition is the essential on-the-job reference tool for electrical industry professionals.

The 2020 Edition offers the most pertinent, up-to-date information for electricians, including updated National Electric Code (NEC) and table change information, mathematical formulas; National Electrical Manufacturers Association (NEMA) wiring configurations; a conduit bending guide, ampacity and conduit fill information, transformer and control circuit wiring diagrams, and conversion tables.

The 2020 Edition:

• Reflects changes to the 2020 NEC
• Features expanded coverage of the following topics:
• Junction Box size calculations
• Selecting, testing, and using multimeters to measure voltage, resistance, and current
• Selecting, testing, and using a clamp-on ammeter to measure current
• Selecting, testing, and using a non-contact voltage tester

Custom Tab Bundle, please specify which books these tabs should reference at checkout