C-15 Roofing and Siding Contractor License and Exam

This code applies to all buildings except detached one- and two-family dwellings and townhouses up to three stories. The 2018 IBC contains many important changes such as:

• Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory.
• New code sections have been introduced addressing medical gas systems and higher education laboratories.
• Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height.
• Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway.
• The occupant load factor for business uses has been revised to one occupant per 150 square feet.
• Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served.
• The minimum lateral load that fire walls are required to resist is five pounds per square foot.
• Wind speed maps updated, including maps for the state of Hawaii.
• Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds.
• Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values).
• Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed.
• New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail.
• Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.

With five complete sections—Asphalt Shingle Roof Systems, Clay and Concrete Roof Systems, Metal Shingle Roof Systems, Slate Roof Systems, and Wood Shake and Wood Shingle Roof Systems—this manual is a welcome addition to your technical library.

Each section includes information about roof decks, underlayments, materials, design and installation. Construction details are provided in each section as follows:

• The Asphalt Shingle Roof Systems section includes 20 construction details.
• The Clay and Concrete Roof Systems section includes 73 construction details.
• The Metal Shingle Roof Systems section includes 19 construction details.
• The Slate Roof Systems section includes 21 construction details.
• The Wood Shake and Wood Shingle Roof Systems section includes 72 construction details.

This roofing manual provides you with comprehensive information about the design, materials and installation techniques applicable to metal panel and spray polyurethane foam roof systems used in low- and steep-slope applications. With two complete sections, Metal Panel Roof Systems and SPF Roof Systems, this manual is a welcome addition to your technical library.

The Metal Panel Roof Systems section includes guidelines applicable to metal and metal panel roof systems, substrates, architectural metal panel systems and structural metal panel roof systems in addition to 84 construction details. The SPF Roof Systems section includes information about materials, design considerations, application and design guidelines, as well as 72 construction details, including SPF details for reroofing and roof systems with fleece-backed membranes.

This latest edition has a new format that assists with proper product and material selection. Users initially can reference the first chapter, which contains a selection of roof system configurations. Each of the configurations has a list of applicable roof components along with references explaining where to find additional information in the manual. Also included are 205 construction details for built-up roof (BUR) membrane, polymer-modified bitumen, liquid-applied, EPDM and thermoplastic membrane roof systems.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

Installation, repair and estimating for nearly every type of roof covering available today in residential and commercial structures: asphalt shingles, roll roofing, wood shingles and shakes, clay tile, slate, metal, built-up, and elastomeric. Covers sheathing and underlayment techniques, as well as secrets for installing leakproof valleys. Many estimating tips help you minimize waste, as well as insure a profit on every job. Troubleshooting techniques help you identify the true source of most leaks.

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

Includes hardbound student edition aligned to the content standards.

If you install (or are thinking about installing) rooftop-mounted PV systems, you need the latest best practices. NRCA's updated guidelines also give you information from the 2018 editions of the International Building Code, International Residential Code, International Fire Code and NFPA 1: Fire Code, and the 2017 edition of NFPA 70: National Electric Code.

This item is out of stock, and out of print. Our exam prep covers the necessary information to learn. This reference is only available as a pdf from publisher's website.

This practice covers the minimum requirements for and the methods of installation of rigid vinyl siding, soffits, and accessories on the exterior wall and soffit areas of buildings. This practice also covers aspects of installation relating to effectiveness and durability in service.

This abstract is a summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete, or up to date

Prepared for the Nevada Construction Business and Law Exam as a study guide and open book reference.

The general business and law or “CMS” exam is open book and this book is allowed to be taken with you when you sit for the exam.

The book is organized into 3 sections.

Part 1 focuses on business planning and start up. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills.

Part 2 is centered on fundamentals that you will need to operate a successful construction business. This section will cover estimating, contract management, scheduling, project management, safety and environmental responsibilities and building good relationships with employees, subcontractors and customers.

Part 3 gives you valuable information for running the administrative function of your business. Financial management, tax basics and lien laws are covered. Effective management of these areas of business is vital and can cause serious problems if you do not give them the proper attention.

Custom Tab Bundle, please specify which books these tabs should reference at checkout

Custom Tab Bundle, please specify which books these tabs should reference at checkout