Hawaii Roofing Contractor License

This code applies to all buildings except detached one- and two-family dwellings and townhouses up to three stories. The 2018 IBC contains many important changes such as:

• Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory.
• New code sections have been introduced addressing medical gas systems and higher education laboratories.
• Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height.
• Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway.
• The occupant load factor for business uses has been revised to one occupant per 150 square feet.
• Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served.
• The minimum lateral load that fire walls are required to resist is five pounds per square foot.
• Wind speed maps updated, including maps for the state of Hawaii.
• Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds.
• Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values).
• Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed.
• New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail.
• Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.

Installation, repair and estimating for nearly every type of roof covering available today in residential and commercial structures: asphalt shingles, roll roofing, wood shingles and shakes, clay tile, slate, metal, built-up, and elastomeric. Covers sheathing and underlayment techniques, as well as secrets for installing leakproof valleys. Many estimating tips help you minimize waste, as well as insure a profit on every job. Troubleshooting techniques help you identify the true source of most leaks.

This latest edition has a new format that assists with proper product and material selection. Users initially can reference the first chapter, which contains a selection of roof system configurations. Each of the configurations has a list of applicable roof components along with references explaining where to find additional information in the manual. Also included are 205 construction details for built-up roof (BUR) membrane, polymer-modified bitumen, liquid-applied, EPDM and thermoplastic membrane roof systems.

With five complete sections—Asphalt Shingle Roof Systems, Clay and Concrete Roof Systems, Metal Shingle Roof Systems, Slate Roof Systems, and Wood Shake and Wood Shingle Roof Systems—this manual is a welcome addition to your technical library.

Each section includes information about roof decks, underlayments, materials, design and installation. Construction details are provided in each section as follows:

• The Asphalt Shingle Roof Systems section includes 20 construction details.
• The Clay and Concrete Roof Systems section includes 73 construction details.
• The Metal Shingle Roof Systems section includes 19 construction details.
• The Slate Roof Systems section includes 21 construction details.
• The Wood Shake and Wood Shingle Roof Systems section includes 72 construction details.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

Custom Tab Bundle, please specify which books these tabs should reference at checkout

**SPECIAL ORDER**

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections.

Part 1 focuses on planning and starting your business. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills.

Part 2 Covers fundamentals you will need to know in order to operate a successful construction business. This section covers estimating, contract management, scheduling, project management, safety and environmental responsibilities, and building good relationships with employees, subcontractors, and customers.

Part 3 provides valuable information to assist you in running the administrative functions of your business. Financial management, tax basics, and lien laws are covered. Effective management of these areas of business is vital and can cause you serious problems if you do not give them proper attention.

Custom Tab Bundle, please specify which books these tabs should reference at checkout