Includes the following courses:
- Limited Warm Air, Air Conditioning and Refrigeration Journeyperson Online Exam Prep
Plus the following:
- All the books to use during the exam
- Permanent/Pre-Printed Tabs
- Free Shipping!
- Instructor Support
- No Pass No Pay Policy
- Lifetime Access from nearly any device
Connecticut Limited Warm Air, Air Conditioning and Refrigeration Contractor Bundle
Includes the following courses:
- Limited Warm Air, Air Conditioning and Refrigeration Online Exam Prep
Plus the following:
- All the books to use during the exam
- Permanent/Pre-Printed Tabs
- Free Shipping!
- Instructor Support
- No Pass No Pay Policy
- Lifetime Access from nearly any device
Journeyperson Exam Prep, Books, Tabs:
Connecticut Limited Warm Air, Air Conditioning and Refrigeration Online Exam Prep
See Details
Included in the bundle
Lifetime Online Access to:
- Limited Warm Air, Air Conditioning and Refrigeration Journeyperson Online Exam Prep
Our Online Exam Prep features:
Ideal for students who already own all references
Important changes in the 2021 IMC include:
- Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building.
- Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits.
- Fire and smoke dampers must be provided with approved access for inspection and maintenance.
- Refrigerant tables updated to include new refrigerants.
- Addition of condensate termination identification markings and discharge restrictions.
- Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement.
- 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems.
- Continuous operation requirement for manicure and pedicure station exhaust systems.
- Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.
NFPA 54: Standard for National Fuel Gas Code, 2012
See Details
**Special Order**
From carbon monoxide poisoning to the risks of fire and explosion, there are many hazards inherent with the utilization of gaseous fuels. NFPA 54 offers comprehensive provisions for the safe design, installation, operation, maintenance, purging, and inspection of gas piping, equipment, accessories, and appliances supplied with fuel gas.
Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.
Uses:
- Sizes metal ducts, lined metal ducts duct board airways, and wire helix flexible ducts.
- Converts round shapes to equivalent rectangles.
- Correlates available pressure with total effective length and friction rate (Manual D sizing calculations).
- Converts velocity into velocity pressure and vice versa.
- Corrects for altitude and temperature
SMACNA Duct Construction Standards Metal and Flexible
See Details
Building on a history of duct construction standards nearly 100 years old, the flagship SMACNA HVAC Duct Construction Standard – Metal & Flexible 4th edition represents the state of the art in the sheet metal duct fabrication and installation requirements. Significant changes for the 4th edition include; flat oval tables for positive/negative pressure applications; spray and aerosolized duct sealants; non-fiberglass duct liner applications; added information on spiral duct fittings; updates to duct hanger requirements; flexible duct hanger spacing and support bracing.
NFPA 58: Standard for Liquid Petroleum Gas Code, 2014
See Details
NFPA 58: Liquefied Petroleum Gas Code provides minimum safety requirements for all liquefied petroleum gas (propane) installations, from small cylinders installed at residences to large bulk storage facilities that can exceed 100,000 gallons. The code includes minimum requirements for safe handling during LP gas transfer, including operator qualifications, maximum filling quantity in containers, and pre-transfer inspections to ensure containers are fit for continued service.
Custom Tab Bundle, please specify which books these tabs should reference at checkout
Contractor Exam Prep, Books, Tabs:
Connecticut Limited Warm Air, Air Conditioning and Refrigeration Online Exam Prep
See Details
Included in the bundle
Lifetime Online Access to:
- Limited Warm Air, Air Conditioning and Refrigeration Journeyperson Online Exam Prep
Our Online Exam Prep features:
Ideal for students who already own all references
Important changes in the 2021 IMC include:
- Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building.
- Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits.
- Fire and smoke dampers must be provided with approved access for inspection and maintenance.
- Refrigerant tables updated to include new refrigerants.
- Addition of condensate termination identification markings and discharge restrictions.
- Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement.
- 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems.
- Continuous operation requirement for manicure and pedicure station exhaust systems.
- Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.
Manual J - Residential Load Calcs (Full Edition)
See Details
Manual J 8th Edition is the national ANSI recognized standard for producing HVAC equipment sizing loads for single-family detached homes, small multi-unit structures, condominiums, town houses, and manufactured homes. A proper load calculation, performed in accordance with the Manual J 8th Edition procedure, is required by national building codes and most state and local jurisdictions.
Manual N - Commercial Load Calculation for Small Commercial Buildings
See Details
The New Fifth Edition of Manual N® details the load calculation procedure that addresses the advances in the commercial construction industry: new materials, methods of assembly, and operational requirements. It provides instruction to help contractors and designers satisfy new, and often conflicting, energy, ventilation, and comfort requirements.
The new Manual N is divided into four sections providing both a quick and comprehensive procedure for commercial load calculation.
- Section 1 Abridged Procedure: Basic instructions to perform commercial load calculations, on buildings of three stories or less. Supports a simplified hand calculation.
- Section 2 Advanced Topics: Provides enhanced procedures, capabilities, and sensitivities (requires computer software to process).
- Section 3 Tables: Provides input for the worksheets and determinations needed for the abridged (N5ae) and full (N5) procedures.
- Section 4 Appendices: Provides supporting materials and details on the N5ae and N5 applications...(640 pages)
NFPA 54: Standard for National Fuel Gas Code, 2012
See Details
**Special Order**
From carbon monoxide poisoning to the risks of fire and explosion, there are many hazards inherent with the utilization of gaseous fuels. NFPA 54 offers comprehensive provisions for the safe design, installation, operation, maintenance, purging, and inspection of gas piping, equipment, accessories, and appliances supplied with fuel gas.
Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.
This book features:
• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces
Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.
Uses:
- Sizes metal ducts, lined metal ducts duct board airways, and wire helix flexible ducts.
- Converts round shapes to equivalent rectangles.
- Correlates available pressure with total effective length and friction rate (Manual D sizing calculations).
- Converts velocity into velocity pressure and vice versa.
- Corrects for altitude and temperature
SMACNA Duct Construction Standards Metal and Flexible
See Details
Building on a history of duct construction standards nearly 100 years old, the flagship SMACNA HVAC Duct Construction Standard – Metal & Flexible 4th edition represents the state of the art in the sheet metal duct fabrication and installation requirements. Significant changes for the 4th edition include; flat oval tables for positive/negative pressure applications; spray and aerosolized duct sealants; non-fiberglass duct liner applications; added information on spiral duct fittings; updates to duct hanger requirements; flexible duct hanger spacing and support bracing.
NFPA 58: Standard for Liquid Petroleum Gas Code, 2014
See Details
NFPA 58: Liquefied Petroleum Gas Code provides minimum safety requirements for all liquefied petroleum gas (propane) installations, from small cylinders installed at residences to large bulk storage facilities that can exceed 100,000 gallons. The code includes minimum requirements for safe handling during LP gas transfer, including operator qualifications, maximum filling quantity in containers, and pre-transfer inspections to ensure containers are fit for continued service.
Custom Tab Bundle, please specify which books these tabs should reference at checkout
CT Business and Law Exam Prep, Books, Tabs, and Bundle:
Includes the following courses:
- Connecticut Business and Law Online Exam Prep
Plus the following:
- All the books to use during the exam
- Permanent/Pre-Printed Tabs
- Free Shipping!
- Instructor Support
- No Pass No Pay Policy
- Lifetime Access from nearly any device
Connecticut Business and Law Bundle
Connecticut Business and Law Online Exam Prep
See Details
Included in the bundle
Lifetime Online Access to:
- Connecticut Business and Law Online Exam Prep
Our Online Exam Prep features:
Ideal for students who already own all references
Connecticut NASCLA Contractors Guide to Business, Law, and Project Management, 6th Edition
See Details
The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections.
Part 1 focuses on planning and starting your business. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills.
Part 2 covers fundamentals you will need to know in order to operate a successful construction business. This section covers estimating, contract management, scheduling, project management, safety and environmental responsibilities, and building good relationships with employees, subcontractors, and customers.
Part 3 provides valuable information to assist you in running the administrative functions of your business. Financial management, tax basics, and lien laws are covered. Effective management of these areas of business is vital and can cause you serious problems if you do not give them proper attention.
Custom Tab Bundle, please specify which books these tabs should reference at checkout
Pre-printed or blank tabs are also available.
At RocketCert, we strive to be the best (while having fun in the process). This means having not only the best quality of education, but also industry leading technology. Best yet, we are here for you 7 days a week. Have a question or comment? Give us a call or contact us to send us a message. Ready to begin? Select from the training below and start immediately. Of course, you can resume later!
LIFETIME ACCESS
Why pay for something knowing your time with it is limited? At RocketCert, we believe in offering lifetime access to your training, even though it will not be needed.
EXPERT EDUCATION
Our education is written by industry experts. We believe in helping you with your career, and that help begins with offering best in class education.
CUSTOMER SUPPORT
We are here for you. Have a question? Need support? Our team is available 7 days a week for technical support. We pride ourselves in taking care of you.
EASY TO TAKE
Our training is available 24/7, and you can start and stop as needed. With our mobile ready courses, you can take from nearly any device at any location.