California General/Residential Electrical Certification and Exam Prep

Prepare for the electrical challenges of tomorrow, today, with NFPA 70, National Electrical Code (NEC), 2020 edition.

The world never stops changing, so it's crucial to keep learning how to keep it safe. Incorporated by reference in all 50 states and used across the globe, NFPA 70®, National Electrical Code® (NEC®), is the benchmark standard for electrical safety in residential, commercial, and industrial settings.

NFPA 70, NEC, was first published in 1897 and is continually put through a rigorous review process to keep it up to date with the most current industry practices, emerging trends, and the development and introduction of new technologies. The new NEC provides the latest requirements for safer and more effective electrical design, installation, and inspection, including provisions for wiring, overcurrent protection, grounding, and equipment.

Get up-to-code and prepared for the safety challenges of new sources of electrical power with the NEC, 2020 edition.

The revised and expanded NFPA 70, National Electrical Code, features state-of-the-art information for safe electrical practices for public and private buildings, homes and structures, outdoor yards and lots, utility equipment, installations that connect to the power grid, and consumer-owned power generation systems and equipment.

Content has been added, edited, and reorganized to address safety for workers, energy systems and electric vehicles, limited energy, and communication systems.

Impactful changes include:

• New requirements for exterior emergency disconnects of one- and two-family dwellings for improved electrical safety for emergency responders
• Revisions to service disconnect rules to help protect electrical workers from arc flash hazards
• Adapted and adjusted requirements for installation practices of new technologies to meet the evolving demand of power over Ethernet
• Updates to modernize tables currently in use for calculations to reflect improvements in energy efficiency and align with evolving codes
• Revised requirements for ground-fault protection within marinas and boatyards
• Introduction of guidelines for the safe use of electric vehicles (electric vehicle power export equipment) as a backup or emergency power source for a building or a home
• Reorganization of Article 310, including new user-friendly numbering for important ampacity tables, and new definition for cable bundle in Article 725
• Relocation of surge protection device requirements to new Article 242
• Revisions to alternative energy systems and electric vehicle requirements to clarify what portions of the PV system are covered by the requirements of Article 690 and the line side and load side connections of interconnected power supply sources, and to clearly distinguish energy storage systems from storage battery systems
• Reorganization of Article 800 to provide a general set of requirements to apply throughout the Chapter 8 articles
• Revisions to requirements for communications cables that are also carrying power to communication devices and revisions to the current limit for cables carrying power and data

The NEC, 2020 edition, introduces significant new requirements for:

• The residential installation of receptacle outlets serving island and peninsular countertops and for surge protection of services supplying dwelling units
• Working space for “housekeeping pads” for electrical equipment, the installation of wiring methods in exit enclosures, sizing supply and load conductors used with adjustable-speed drive systems, and AFCI protection of branch circuits in patient sleeping areas in care facilities
• Calculating the load of electric vehicle supply equipment with variable current settings
• Worker safety in identifying the source of power for disconnecting means and for egress from spaces containing large electrical equipment
• Grounding of disconnecting means installed on the supply-side of service disconnecting means
• Cables installed exposed on ceiling surfaces and sidewalls
• Special occupancies, special equipment, and special conditions, including installation of splash pads, the use of “Type P” cables in hazardous classified locations, and the reinspection of swimming pools and other bodies of water

Help protect life and property with the most relevant electrical requirements.

Get the cutting edge information you need to identify and overcome the latest hazards and complexities in electrical work. Order your copy of NFPA 70®, National Electrical Code, 2020 edition, today.

Keep the workplace safe from electrical hazards using the 2018 edition of NFPA 70E®.

In a fraction of a second, an electrical incident can claim lives and cause permanently disabling injuries. In fact, hundreds of deaths and thousands of burn injuries occur each year due to shock, electrocution, arc flash, and arc blast -- and most could be prevented through compliance with NFPA 70E, Standard for Electrical Safety in the Workplace®.

Originally developed at OSHA's request, NFPA 70E responds to the latest information about the effects of arc flash, arc blast, and direct current (dc) hazards, and recent developments in electrical design and Personal Protective Equipment (PPE). It provides vital information that helps you comply with OSHA 1910 Subpart S and OSHA 1926 Subpart K.

Make sure everyone goes home at night. New NFPA 70E explicitly states that the first priority must be the elimination of the hazard.

The Standard continues to evolve to address risk assessment and introduces human factors, such as human error, as part of that assessment. Annex Q, Human Performance and Workplace Electrical Safety, is included to provide guidance. NFPA 70E emphasizes the need to use the hierarchy of risk controls, by moving it from an informational note into the text of the Standard. NFPA 70E now explicitly states that the first priority must be the elimination of the hazard.

Other changes in this edition:

• A modified arc flash hazard identification table [Table 130.7(C)(15)(A)(a)] makes it easier to determine the likelihood that an arc flash could occur.
• Reorganized Article 120 presents the requirements for establishing an electrically safe work condition in a logical order of application of the program.
• Changes to Article 320 introduce voltage thresholds of 100 Vdc specifically for batteries and battery rooms to cover the unique situations in these locations.
• Extensively revised, Article 330 on lasers now focuses on safety-related maintenance issues rather than issues associated with laser use.
• Article 350 introduces an Electrical Safety Authority as a possible authority having jurisdiction for laboratories.

Bring your company's electrical safety program up-to-date and give employees critical knowledge.

If you're responsible for ensuring workers are protected from shock and arc flash hazards, use the 2018 edition of NFPA 70E along with NFPA 70®, National Electrical Code® (NEC®) and NFPA 70B, Electrical Equipment Maintenance. Together, the "Big Three" help you protect your personnel and your company from tragic loss. NFPA 70E is a vital tool for contractors, risk managers, engineers, building managers, owners, and everyone concerned with ending electrical-related accidents, liability, and loss.

Ugly’s Electrical References, 2023 Edition is the essential on-the-job reference tool for electrical industry professionals.

The 2023 Edition provides the most pertinent, up-to-date information used by electricians, including updated NEC code and table change information; mathematical formulas; NEMA wiring configurations; conduit bending guide; ampacity and conduit fill information; transformer and control circuit wiring diagrams; and conversion tables.

• Reflects changes to the 2023 National Electrical Code (NEC)
• Features expanded coverage of the following topics:
• Full-load currents for 3-phase transformers
• Maximum number of conductors in electrical metallic tubing for trade sizes 5 and 6
• Equipment grounding conductors
• General lighting loads for non-dwelling occupancies