Arizona Contractor License B / B-2 / KB-2 Info and Exam Prep

This code applies to all buildings except detached one- and two-family dwellings and townhouses up to three stories. The 2018 IBC contains many important changes such as:

• Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory.
• New code sections have been introduced addressing medical gas systems and higher education laboratories.
• Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height.
• Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway.
• The occupant load factor for business uses has been revised to one occupant per 150 square feet.
• Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served.
• The minimum lateral load that fire walls are required to resist is five pounds per square foot.
• Wind speed maps updated, including maps for the state of Hawaii.
• Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds.
• Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values).
• Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed.
• New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail.
• Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.

The IRC contains many important changes such as:

• An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable.
• The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall.
• An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening.
• The exemption for interconnection of smoke alarms in existing areas has been deleted.
• New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine.
• New tables address alternative wood stud heights and the required number of full height studs in high wind areas.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

This fully revised 17th edition was written to provide a concise, current reference on concrete, including the many developments that occurred since the last edition was published in 2016. The text is backed by over 100 years of research by the Portland Cement Association and other industry groups. It reflects the latest guidance on standards, specifications, and test methods of ASTM International (ASTM), the American Association of State Highway and Transportation Officials (AASHTO), and the American Concrete Institute (ACI).

The 17th edition includes an in-depth restructuring of the existing content, presenting a 40% increase in new information over the prior edition within the previous chapters. This edition also has added two new chapters on imperfections in concrete, and innovations in concrete.

Over 3 million copies of past editions of the book have been distributed, making this book a primary reference on concrete technology.

Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

Learn how to find the right kind of work, read and compute quantities from the plans, figure realistic crew and equipment productivity rates, consider job variables, calculate your O & P, then estimate and bid the job, and get the bonds you need. Also, how to deal with change orders and liquidated damages, choosing the right equipment, and handling safety issues.

When it comes to doing the actual work, you ll find the combined expertise of two long-time professionals, explaining how to follow and read the surveyor s reference stakes; how to check grade and line with an optical level, transit and pipe laser, and how to use GPS systems. See the best ways to clear the site, including asphalt and rock; handle rock, steep slopes and high groundwater; meet compaction requirements; install septic tanks and drain fields; all common types of water and sewer pipe, and how to do subsurface excavation.

The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturers plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are panelized erection and common field issues.

This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9.

General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

Includes hardbound student edition aligned to the content standards.

Code features reference the International Residential Code and International Building Code, familiarizing students with their requirements. Updated, color images have been added throughout the text to reinforce chapter topics. Over 75 illustrated step-by-step procedures guide student learning.

Custom Tab Bundle, please specify which books these tabs should reference at checkout

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

The IRC contains many important changes such as:

• An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable.
• The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall.
• An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening.
• The exemption for interconnection of smoke alarms in existing areas has been deleted.
• New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine.
• New tables address alternative wood stud heights and the required number of full height studs in high wind areas.

Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

Learn how to find the right kind of work, read and compute quantities from the plans, figure realistic crew and equipment productivity rates, consider job variables, calculate your O & P, then estimate and bid the job, and get the bonds you need. Also, how to deal with change orders and liquidated damages, choosing the right equipment, and handling safety issues.

When it comes to doing the actual work, you ll find the combined expertise of two long-time professionals, explaining how to follow and read the surveyor s reference stakes; how to check grade and line with an optical level, transit and pipe laser, and how to use GPS systems. See the best ways to clear the site, including asphalt and rock; handle rock, steep slopes and high groundwater; meet compaction requirements; install septic tanks and drain fields; all common types of water and sewer pipe, and how to do subsurface excavation.

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

Includes hardbound student edition aligned to the content standards.

Drywall, joint compound, backerboard, plaster finishes, ceiling panels, sheathing gypsum-based products are essential for construction jobs large and small. From the planning process all the way down to the jobsite, understanding how and when to correctly use gypsum materials can mean the difference between a job well done and a construction nightmare. Since 1905, The Gypsum Construction Handbook has been the standard manual for construction professionals.

New materials, new methods, and new requirements demand new approaches, plain and simple. The gypsum revolution changed the world of building construction, and The Gypsum Construction Handbook has kept up with innovation in the industry ever since. This Seventh Edition update includes essential guidelines for using state-of-the art USG products, including innovative ultralight, sustainable, and low-dust materials.

USG has been the global leader in gypsum construction products for over a century, and the company employs the world’s premier experts on building with gypsum. These experts are the people who designed the leading products in the industry, and they are the people who wrote the book on how to use them.

This book includes detailed instructions for using USG products, including:

• USG Securock Brand Glass-Mat Sheathing
• USG Sheetrock Products
• USG Fiberock Panels
• USG Ceilings Brand Clean Room ClimaPlus Acoustical Panels
• USG Durock & Accessory Products
• USG Imperial & Diamond Brand Plasters

In addition, you’ll find general construction best practices for everything from framing to finishing. The Gypsum Construction Handbook also contains all the essentials on health, safety, code, and sustainability.

This document is published jointly by the American Concrete Institute (ACI) and the American Society of Concrete Contractors (ASCC). It has been reviewed in accordance with the Educational Committee Manual document review procedures of the ACI Educational Activities Committee. ACI and ASCC reports are intended for guidance in planning, designing, executing, and inspecting construction. This document is intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains. A summary, review questions, and additional recommended reading list accompany each of the 12 chapters.

Custom Tab Bundle, please specify which books these tabs should reference at checkout