Mississippi Remodeling License & Exam Prep

The 2021 IRC® contains many important changes such as:

• Braced wall lines must be placed on a physical wall or placed between multiple walls.
• The rated separation for two-family dwellings is 1 hour whether or not a lot line exists between units.
• Emergency escape and rescue openings require a clear 36-inch-wide path to a public way.
• An engineered design is required for storm shelters.
• A habitable attic is limited to one-half the area of the story below and the dwelling requires sprinklers.
• Updated Wind Speed maps match IBC and ASCE 7 maps.
• Deck design now considers snow load, tributary area for footing and post height, and guard details.
• Specific requirements for deck guardrails were added.
• Component and cladding wind pressures in Table R301.2(2) are updated for new design wind speeds and hip or gable roof profiles.
• Minimum footing size tables are revised to more accurately reflect current practice.
• Cripple wall requirements apply only to exterior cripple walls.
• New appendices for cob construction and 3D printed construction are added.
• A 30 percent reduction of airflow is permitted for balanced ventilation systems.
• Commercial gas cooking appliances are prohibited.
• The head pressure for a water test of DWV systems increased to 10 feet.
• Air vacuum testing is now permitted for plastic piping DWV systems.
• Section P2904 for dwelling sprinklers is expanded to more closely align with NFPA 13D.
• An emergency service disconnect is required in a readily accessible outdoor location.
• A surge-protective device (SPD) is now required at the service panel.
• The number of receptacle outlets required for peninsular and island countertops in kitchens is determined by the area of the countertop surface.
• GFCI protection is now required for damp and wet locations not included in the other 10 areas requiring GFCI protection.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

Easy-to-follow instructions for installing doors and windows, ceiling treatments (including fancy beams, corbels, cornices and moldings), wall treatments (including wainscoting and sheet paneling), and many special finishing touches. Specialized interior work includes cabinetry and built-ins, stair finish work, and closets. Includes manhour tables for finish work, and hundreds of illustrations.

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

Includes hardbound student edition aligned to the content standards.

This code applies to all buildings except detached one- and two-family dwellings and townhouses up to three stories. The 2018 IBC contains many important changes such as:

• Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory.
• New code sections have been introduced addressing medical gas systems and higher education laboratories.
• Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height.
• Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway.
• The occupant load factor for business uses has been revised to one occupant per 150 square feet.
• Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served.
• The minimum lateral load that fire walls are required to resist is five pounds per square foot.
• Wind speed maps updated, including maps for the state of Hawaii.
• Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds.
• Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values).
• Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed.
• New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail.
• Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.

This fully revised 17th edition was written to provide a concise, current reference on concrete, including the many developments that occurred since the last edition was published in 2016. The text is backed by over 100 years of research by the Portland Cement Association and other industry groups. It reflects the latest guidance on standards, specifications, and test methods of ASTM International (ASTM), the American Association of State Highway and Transportation Officials (AASHTO), and the American Concrete Institute (ACI).

The 17th edition includes an in-depth restructuring of the existing content, presenting a 40% increase in new information over the prior edition within the previous chapters. This edition also has added two new chapters on imperfections in concrete, and innovations in concrete.

Over 3 million copies of past editions of the book have been distributed, making this book a primary reference on concrete technology.

Code features reference the International Residential Code and International Building Code, familiarizing students with their requirements. Updated, color images have been added throughout the text to reinforce chapter topics. Over 75 illustrated step-by-step procedures guide student learning.

Custom Tab Bundle, please specify which books these tabs should reference at checkout

The 2021 IRC® contains many important changes such as:

• Braced wall lines must be placed on a physical wall or placed between multiple walls.
• The rated separation for two-family dwellings is 1 hour whether or not a lot line exists between units.
• Emergency escape and rescue openings require a clear 36-inch-wide path to a public way.
• An engineered design is required for storm shelters.
• A habitable attic is limited to one-half the area of the story below and the dwelling requires sprinklers.
• Updated Wind Speed maps match IBC and ASCE 7 maps.
• Deck design now considers snow load, tributary area for footing and post height, and guard details.
• Specific requirements for deck guardrails were added.
• Component and cladding wind pressures in Table R301.2(2) are updated for new design wind speeds and hip or gable roof profiles.
• Minimum footing size tables are revised to more accurately reflect current practice.
• Cripple wall requirements apply only to exterior cripple walls.
• New appendices for cob construction and 3D printed construction are added.
• A 30 percent reduction of airflow is permitted for balanced ventilation systems.
• Commercial gas cooking appliances are prohibited.
• The head pressure for a water test of DWV systems increased to 10 feet.
• Air vacuum testing is now permitted for plastic piping DWV systems.
• Section P2904 for dwelling sprinklers is expanded to more closely align with NFPA 13D.
• An emergency service disconnect is required in a readily accessible outdoor location.
• A surge-protective device (SPD) is now required at the service panel.
• The number of receptacle outlets required for peninsular and island countertops in kitchens is determined by the area of the countertop surface.
• GFCI protection is now required for damp and wet locations not included in the other 10 areas requiring GFCI protection.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

Includes hardbound student edition aligned to the content standards.

Easy-to-follow instructions for installing doors and windows, ceiling treatments (including fancy beams, corbels, cornices and moldings), wall treatments (including wainscoting and sheet paneling), and many special finishing touches. Specialized interior work includes cabinetry and built-ins, stair finish work, and closets. Includes manhour tables for finish work, and hundreds of illustrations.

In The Complete Illustrated Guide to Furniture & Cabinet Construction, you'll acquire a working knowledge of woodworking materials, a higher control over your work and tools and an understanding of basic design principles.

The IRC contains many important changes such as:

• An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable.
• The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall.
• An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening.
• The exemption for interconnection of smoke alarms in existing areas has been deleted.
• New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine.
• New tables address alternative wood stud heights and the required number of full height studs in high wind areas.

This document is published jointly by the American Concrete Institute (ACI) and the American Society of Concrete Contractors (ASCC). It has been reviewed in accordance with the Educational Committee Manual document review procedures of the ACI Educational Activities Committee. ACI and ASCC reports are intended for guidance in planning, designing, executing, and inspecting construction. This document is intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains. A summary, review questions, and additional recommended reading list accompany each of the 12 chapters.

Code features reference the International Residential Code and International Building Code, familiarizing students with their requirements. Updated, color images have been added throughout the text to reinforce chapter topics. Over 75 illustrated step-by-step procedures guide student learning.

Custom Tab Bundle, please specify which books these tabs should reference at checkout

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections.