Georgia General Contractor License and Exam Prep

Mechanical and Electrical Systems for Construction Managers is designed for general contractors, construction managers, supervisors, and those desiring to enter the construction industry. This comprehensive edition includes sustainable construction methods and energy efficiencies along with building automation retrofits of existing mechanical, electrical, and plumbing systems.

The 2021 IBC® contains many important changes such as:

• Puzzle rooms (escape rooms) are now defined and regulated as special amusement areas, requiring compliance with Section 411 and special means of egress requirements.
• For the purposes of determining the allowable number of control areas in a building, each portion separated by one or more fire walls is now considered as a separate building.
• In Group E occupancies, enhanced classroom acoustics in compliance with ICC A117.1 are to be provided in all classrooms having of volume of 20,000 cubic feet or less.
• The requirements for metal composite materials and systems (MCM) installed on the exterior walls of Types I, II, III and IV construction were simplified and sprinkler allowances were deleted.
• The use of intermodal shipping containers as buildings is now specifically addressed through provisions intended to supplement existing applicable IBC requirements.
• Automatic sprinkler protection is now required in Group S-2 open parking garages where any fire area exceeds 48,000 square feet.
• The 2017 edition of ICC A117.1 was adopted.
• Parapets of a minimum height are now required for aggregate-surfaced roofs to prevent blow-off.
• Mixed occupancy buildings with assembly spaces are placed in Risk Category III when the total public assembly occupant load is greater than 2500 people.
• The 2021 IBC snow map is updated to match ASCE 7-16 snow maps by adding a reference to ASCE 7 snow tables in states with large case study areas.
• Secondary rain loads are updated to be consistent with ASCE 7.
• Special inspection requirements were added to address the anchorage and connection of mass timber structural elements.
• Installation of firestop, fire-resistant joint systems and perimeter fire barrier systems in residential-use buildings now requires special inspection in Group R fire areas having an occupant load exceeding 250 people.
• Frost protection for egress doors was added to the foundation requirements.
• ACI standards ACI 117 and ITG 7 were added by reference to provide acceptable tolerances for concrete construction.
• Three new types of construction (Types IV-A, IV-B, and IV-C) allow mass timber buildings of taller heights, more stories above grade, and greater allowable areas compared to existing provisions for heavy timber buildings.

The “Building Code Requirements for Structural Concrete” (“Code”) provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code addresses structural systems, members, and connections, including cast-in-place, precast, plain, nonprestressed, prestressed, and composite construction. Among the subjects covered are: design and construction for strength, serviceability, and durability; load combinations, load factors, and strength reduction factors; structural analysis methods; deflection limits; mechanical and adhesive anchoring to concrete; development and splicing of reinforcement; construction document information; field inspection and testing; and methods to evaluate the strength of existing structures. “Building Code Requirements for Concrete Thin Shells” (ACI 318.2) is adopted by reference in this Code.The Code user will find that ACI 318-14 has been substantially reorganized and reformatted from previous editions. The principal objectives of this reorganization are to present all design and detailing requirements for structural systems or for individual members in chapters devoted to those individual subjects, and to arrange the chapters in a manner that generally follows the process and chronology of design and construction. Information and procedures that are common to the design of members are located in utility chapters.

The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate American Welding Society (AWS) standard. Uses of the Code include adoption by reference in a general building code, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code provisions cannot be included within the Code itself. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail.

Produced by SBCA, BCSI is the truss industry's guide for Jobsite safety and truss performance. This edition includes the most current information regarding the handling, installation, restraining, and bracing of metal plate connected wood trusses. BCSI includes information and guidance pertaining to diagonal bracing for web members with two rows of lateral restraint, as well as permanent lateral restraint and diagonal bracing guidance for trusses spaced wider than 2' o.c.

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

Includes hardbound student edition aligned to the content standards.

The newly updated Fourth Edition of CONSTRUCTION JOBSITE MANAGEMENT examines all facets of construction project management from the contractor's point of view. The responsibilities of project managers, construction superintendents, and construction engineers are covered in depth, from configuring a project team through closing out a project. The text maintains a strong focus on jobsite personnel activities, outlining proven procedures and offering helpful techniques to manage projects effectively from start to finish. Clear, concise language and accurate, relevant detail make this book an essential introduction to the "real world" of construction jobsite management.

This document is published jointly by the American Concrete Institute (ACI) and the American Society of Concrete Contractors (ASCC). It has been reviewed in accordance with the Educational Committee Manual document review procedures of the ACI Educational Activities Committee. ACI and ASCC reports are intended for guidance in planning, designing, executing, and inspecting construction. This document is intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains. A summary, review questions, and additional recommended reading list accompany each of the 12 chapters.

This manual is intended to provide standards (shown in boldface) and corresponding guidelines (commentary) for the erection of plant-produced precast and prestressed concrete products, and to establish a level of quality that will be recognized and respected by the construction industry.

This book helps readers understand the fundamental concepts of sustainable design and green building practices, which will soon become common practice on every project. It is also intended as a practical study guide for the LEED Green Associate exam, with a step-by-step study guide and an assessment (a practice exam with 80 questions and a focused discussion for each example). This book includes a discussion on why this topic is important to understand, practice, and teach along with practical examples of methods that are being used to increase a project’s environmental performance and additional study resources/references.

Drywall, joint compound, backerboard, plaster finishes, ceiling panels, sheathing gypsum-based products are essential for construction jobs large and small. From the planning process all the way down to the jobsite, understanding how and when to correctly use gypsum materials can mean the difference between a job well done and a construction nightmare. Since 1905, The Gypsum Construction Handbook has been the standard manual for construction professionals.

New materials, new methods, and new requirements demand new approaches, plain and simple. The gypsum revolution changed the world of building construction, and The Gypsum Construction Handbook has kept up with innovation in the industry ever since. This Seventh Edition update includes essential guidelines for using state-of-the art USG products, including innovative ultralight, sustainable, and low-dust materials.

USG has been the global leader in gypsum construction products for over a century, and the company employs the world’s premier experts on building with gypsum. These experts are the people who designed the leading products in the industry, and they are the people who wrote the book on how to use them.

This book includes detailed instructions for using USG products, including:

• USG Securock Brand Glass-Mat Sheathing
• USG Sheetrock Products
• USG Fiberock Panels
• USG Ceilings Brand Clean Room ClimaPlus Acoustical Panels
• USG Durock & Accessory Products
• USG Imperial & Diamond Brand Plasters

In addition, you’ll find general construction best practices for everything from framing to finishing. The Gypsum Construction Handbook also contains all the essentials on health, safety, code, and sustainability.

Explore the ICC/ANSI A117.1-2017, a comprehensive guide aimed at enabling individuals with physical disabilities to autonomously access and utilize various sites, facilities, buildings, and elements. This standard outlines specifications tailored to accommodate a spectrum of disabilities including mobility limitations, visual or hearing impairments, incoordination, sensory processing difficulties, and diverse physical sizes, ensuring inclusivity and usability for all.

Code features reference the International Residential Code and International Building Code, familiarizing students with their requirements. Updated, color images have been added throughout the text to reinforce chapter topics. Over 75 illustrated step-by-step procedures guide student learning.

The NASCLA Contractors Guide to Business, Law and Project Management is organized into three sections.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

General principles for bar placing, splicing and tying, and bar placement in footings, walls, columns, floors, roofs, pavement and transportation structures are provided. This guide also includes a chapter addressing epoxy-coated and other coated reinforcement. Produced by the Concrete Reinforcing Steel Institute, this industry-trusted publication is essential for preparing provisions in project specifications and the definitive resource for apprentices, journeymen ironworkers, and inspectors.

Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

Learn how to find the right kind of work, read and compute quantities from the plans, figure realistic crew and equipment productivity rates, consider job variables, calculate your O & P, then estimate and bid the job, and get the bonds you need. Also, how to deal with change orders and liquidated damages, choosing the right equipment, and handling safety issues.

When it comes to doing the actual work, you ll find the combined expertise of two long-time professionals, explaining how to follow and read the surveyor s reference stakes; how to check grade and line with an optical level, transit and pipe laser, and how to use GPS systems. See the best ways to clear the site, including asphalt and rock; handle rock, steep slopes and high groundwater; meet compaction requirements; install septic tanks and drain fields; all common types of water and sewer pipe, and how to do subsurface excavation.

Principles and Practices of Commercial Construction teaches students how to apply design theory to the construction process, providing crucial working knowledge for contractors managing subcontractors. Progressing from basic to advanced material, the text appears on the approved reference list for numerous states requiring contractors to pass licensing exams.

Installation, repair and estimating for nearly every type of roof covering available today in residential and commercial structures: asphalt shingles, roll roofing, wood shingles and shakes, clay tile, slate, metal, built-up, and elastomeric. Covers sheathing and underlayment techniques, as well as secrets for installing leakproof valleys. Many estimating tips help you minimize waste, as well as insure a profit on every job. Troubleshooting techniques help you identify the true source of most leaks.

The new Third Edition of the Steel Deck Institute Manual of Construction with Steel Deck (MOC3) continues the tradition established by earlier editions to provide information necessary for the proper field usage of steel deck. This edition is reformatted for easier use with updated references, including those for the SDI QA/QC Standard for Quality Control and Quality Assurance of Steel Deck.

This instructional manual has been prepared by the Post-Tensioning Institute's Committee for Training and Certification of Field Personnel for Unbonded Post-Tensioning soley as a recommended general guide and assistance to the placement, installation and inspection of unbonded single strand post-tensioning systems, the operation of stressing equipment, and accessories.

The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturers plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are panelized erection and common field issues.

This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9.

General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.

Custom Tab Bundle, please specify which books these tabs should reference at checkout