Arkansas HVACR License and Exam Prep

Important changes in the 2021 IMC include:

• Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building.
• Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits.
• Fire and smoke dampers must be provided with approved access for inspection and maintenance.
• Refrigerant tables updated to include new refrigerants.
• Addition of condensate termination identification markings and discharge restrictions.
• Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement.
• 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems.
• Continuous operation requirement for manicure and pedicure station exhaust systems.
• Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

Prepare for the electrical challenges of tomorrow, today, with NFPA 70, National Electrical Code (NEC), 2020 edition.

The world never stops changing, so it's crucial to keep learning how to keep it safe. Incorporated by reference in all 50 states and used across the globe, NFPA 70®, National Electrical Code® (NEC®), is the benchmark standard for electrical safety in residential, commercial, and industrial settings.

NFPA 70, NEC, was first published in 1897 and is continually put through a rigorous review process to keep it up to date with the most current industry practices, emerging trends, and the development and introduction of new technologies. The new NEC provides the latest requirements for safer and more effective electrical design, installation, and inspection, including provisions for wiring, overcurrent protection, grounding, and equipment.

Get up-to-code and prepared for the safety challenges of new sources of electrical power with the NEC, 2020 edition.

The revised and expanded NFPA 70, National Electrical Code, features state-of-the-art information for safe electrical practices for public and private buildings, homes and structures, outdoor yards and lots, utility equipment, installations that connect to the power grid, and consumer-owned power generation systems and equipment.

Content has been added, edited, and reorganized to address safety for workers, energy systems and electric vehicles, limited energy, and communication systems.

Impactful changes include:

• New requirements for exterior emergency disconnects of one- and two-family dwellings for improved electrical safety for emergency responders
• Revisions to service disconnect rules to help protect electrical workers from arc flash hazards
• Adapted and adjusted requirements for installation practices of new technologies to meet the evolving demand of power over Ethernet
• Updates to modernize tables currently in use for calculations to reflect improvements in energy efficiency and align with evolving codes
• Revised requirements for ground-fault protection within marinas and boatyards
• Introduction of guidelines for the safe use of electric vehicles (electric vehicle power export equipment) as a backup or emergency power source for a building or a home
• Reorganization of Article 310, including new user-friendly numbering for important ampacity tables, and new definition for cable bundle in Article 725
• Relocation of surge protection device requirements to new Article 242
• Revisions to alternative energy systems and electric vehicle requirements to clarify what portions of the PV system are covered by the requirements of Article 690 and the line side and load side connections of interconnected power supply sources, and to clearly distinguish energy storage systems from storage battery systems
• Reorganization of Article 800 to provide a general set of requirements to apply throughout the Chapter 8 articles
• Revisions to requirements for communications cables that are also carrying power to communication devices and revisions to the current limit for cables carrying power and data

The NEC, 2020 edition, introduces significant new requirements for:

• The residential installation of receptacle outlets serving island and peninsular countertops and for surge protection of services supplying dwelling units
• Working space for “housekeeping pads” for electrical equipment, the installation of wiring methods in exit enclosures, sizing supply and load conductors used with adjustable-speed drive systems, and AFCI protection of branch circuits in patient sleeping areas in care facilities
• Calculating the load of electric vehicle supply equipment with variable current settings
• Worker safety in identifying the source of power for disconnecting means and for egress from spaces containing large electrical equipment
• Grounding of disconnecting means installed on the supply-side of service disconnecting means
• Cables installed exposed on ceiling surfaces and sidewalls
• Special occupancies, special equipment, and special conditions, including installation of splash pads, the use of “Type P” cables in hazardous classified locations, and the reinspection of swimming pools and other bodies of water

Help protect life and property with the most relevant electrical requirements.

Get the cutting edge information you need to identify and overcome the latest hazards and complexities in electrical work. Order your copy of NFPA 70®, National Electrical Code, 2020 edition, today.

Key changes in the 2021 IFGC® include:

• The termination of concealed condensate piping requires marking to indicate if it is the primary drain or the secondary drain.
• Press-connect joints are acceptable for high pressure (over 5 psig) applications indoors.
• Commercial cooking appliances are not allowed within dwelling units.

MJ8AE, an abridged version of the Eighth Edition of Manual J, provides complete instructions for estimating heat loss and heat gain for residential structures. MJ8AE is sufficient for learning the Manual J procedures and for undertaking hand calculations on a varied number of home applications.

Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.

Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.

Key changes in the 2021 IFGC® include:

• The termination of concealed condensate piping requires marking to indicate if it is the primary drain or the secondary drain.
• Press-connect joints are acceptable for high pressure (over 5 psig) applications indoors.
• Commercial cooking appliances are not allowed within dwelling units.

Prepare for the electrical challenges of tomorrow, today, with NFPA 70, National Electrical Code (NEC), 2020 edition.

The world never stops changing, so it's crucial to keep learning how to keep it safe. Incorporated by reference in all 50 states and used across the globe, NFPA 70®, National Electrical Code® (NEC®), is the benchmark standard for electrical safety in residential, commercial, and industrial settings.

NFPA 70, NEC, was first published in 1897 and is continually put through a rigorous review process to keep it up to date with the most current industry practices, emerging trends, and the development and introduction of new technologies. The new NEC provides the latest requirements for safer and more effective electrical design, installation, and inspection, including provisions for wiring, overcurrent protection, grounding, and equipment.

Get up-to-code and prepared for the safety challenges of new sources of electrical power with the NEC, 2020 edition.

The revised and expanded NFPA 70, National Electrical Code, features state-of-the-art information for safe electrical practices for public and private buildings, homes and structures, outdoor yards and lots, utility equipment, installations that connect to the power grid, and consumer-owned power generation systems and equipment.

Content has been added, edited, and reorganized to address safety for workers, energy systems and electric vehicles, limited energy, and communication systems.

Impactful changes include:

• New requirements for exterior emergency disconnects of one- and two-family dwellings for improved electrical safety for emergency responders
• Revisions to service disconnect rules to help protect electrical workers from arc flash hazards
• Adapted and adjusted requirements for installation practices of new technologies to meet the evolving demand of power over Ethernet
• Updates to modernize tables currently in use for calculations to reflect improvements in energy efficiency and align with evolving codes
• Revised requirements for ground-fault protection within marinas and boatyards
• Introduction of guidelines for the safe use of electric vehicles (electric vehicle power export equipment) as a backup or emergency power source for a building or a home
• Reorganization of Article 310, including new user-friendly numbering for important ampacity tables, and new definition for cable bundle in Article 725
• Relocation of surge protection device requirements to new Article 242
• Revisions to alternative energy systems and electric vehicle requirements to clarify what portions of the PV system are covered by the requirements of Article 690 and the line side and load side connections of interconnected power supply sources, and to clearly distinguish energy storage systems from storage battery systems
• Reorganization of Article 800 to provide a general set of requirements to apply throughout the Chapter 8 articles
• Revisions to requirements for communications cables that are also carrying power to communication devices and revisions to the current limit for cables carrying power and data

The NEC, 2020 edition, introduces significant new requirements for:

• The residential installation of receptacle outlets serving island and peninsular countertops and for surge protection of services supplying dwelling units
• Working space for “housekeeping pads” for electrical equipment, the installation of wiring methods in exit enclosures, sizing supply and load conductors used with adjustable-speed drive systems, and AFCI protection of branch circuits in patient sleeping areas in care facilities
• Calculating the load of electric vehicle supply equipment with variable current settings
• Worker safety in identifying the source of power for disconnecting means and for egress from spaces containing large electrical equipment
• Grounding of disconnecting means installed on the supply-side of service disconnecting means
• Cables installed exposed on ceiling surfaces and sidewalls
• Special occupancies, special equipment, and special conditions, including installation of splash pads, the use of “Type P” cables in hazardous classified locations, and the reinspection of swimming pools and other bodies of water

Help protect life and property with the most relevant electrical requirements.

Get the cutting edge information you need to identify and overcome the latest hazards and complexities in electrical work. Order your copy of NFPA 70®, National Electrical Code, 2020 edition, today.

Equip your students with the knowledge and skills to maintain and troubleshoot complex heating, air conditioning, and refrigeration systems with REFRIGERATION & AIR CONDITIONING TECHNOLOGY, Ninth Edition. With content aligning to the latest industry standards, this trusted resource continues to provide leadingcontent and skill-building activities to prep learners for several certifications and exams -- ICE, NATE, HVAC Excellence, RSES, HARDi, and United Association (UA) STAR. This best-selling text offers the hands-on guidance, practical applications, and solid foundation your students need to understand HVAC service and repair, environmental challenges, and their solutions. Focused on sustainable technology, this edition covers technical advances in the industry while helping students develop important soft skills and a deeper understanding of customer relations issues. Memorable examples, more than 260 supporting photos, and unique Service Call features bring concepts to life and help students develop the skills needed for professional success. Available with this text is THE COMPLETE HVAC LAB MANUAL, which features more than 250 lab exercises covering 15 topic areas. See the supplements section for more details.

MJ8AE, an abridged version of the Eighth Edition of Manual J, provides complete instructions for estimating heat loss and heat gain for residential structures. MJ8AE is sufficient for learning the Manual J procedures and for undertaking hand calculations on a varied number of home applications.

Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.

Prepare for the electrical challenges of tomorrow, today, with NFPA 70, National Electrical Code (NEC), 2020 edition.

The world never stops changing, so it's crucial to keep learning how to keep it safe. Incorporated by reference in all 50 states and used across the globe, NFPA 70®, National Electrical Code® (NEC®), is the benchmark standard for electrical safety in residential, commercial, and industrial settings.

NFPA 70, NEC, was first published in 1897 and is continually put through a rigorous review process to keep it up to date with the most current industry practices, emerging trends, and the development and introduction of new technologies. The new NEC provides the latest requirements for safer and more effective electrical design, installation, and inspection, including provisions for wiring, overcurrent protection, grounding, and equipment.

Get up-to-code and prepared for the safety challenges of new sources of electrical power with the NEC, 2020 edition.

The revised and expanded NFPA 70, National Electrical Code, features state-of-the-art information for safe electrical practices for public and private buildings, homes and structures, outdoor yards and lots, utility equipment, installations that connect to the power grid, and consumer-owned power generation systems and equipment.

Content has been added, edited, and reorganized to address safety for workers, energy systems and electric vehicles, limited energy, and communication systems.

Impactful changes include:

• New requirements for exterior emergency disconnects of one- and two-family dwellings for improved electrical safety for emergency responders
• Revisions to service disconnect rules to help protect electrical workers from arc flash hazards
• Adapted and adjusted requirements for installation practices of new technologies to meet the evolving demand of power over Ethernet
• Updates to modernize tables currently in use for calculations to reflect improvements in energy efficiency and align with evolving codes
• Revised requirements for ground-fault protection within marinas and boatyards
• Introduction of guidelines for the safe use of electric vehicles (electric vehicle power export equipment) as a backup or emergency power source for a building or a home
• Reorganization of Article 310, including new user-friendly numbering for important ampacity tables, and new definition for cable bundle in Article 725
• Relocation of surge protection device requirements to new Article 242
• Revisions to alternative energy systems and electric vehicle requirements to clarify what portions of the PV system are covered by the requirements of Article 690 and the line side and load side connections of interconnected power supply sources, and to clearly distinguish energy storage systems from storage battery systems
• Reorganization of Article 800 to provide a general set of requirements to apply throughout the Chapter 8 articles
• Revisions to requirements for communications cables that are also carrying power to communication devices and revisions to the current limit for cables carrying power and data

The NEC, 2020 edition, introduces significant new requirements for:

• The residential installation of receptacle outlets serving island and peninsular countertops and for surge protection of services supplying dwelling units
• Working space for “housekeeping pads” for electrical equipment, the installation of wiring methods in exit enclosures, sizing supply and load conductors used with adjustable-speed drive systems, and AFCI protection of branch circuits in patient sleeping areas in care facilities
• Calculating the load of electric vehicle supply equipment with variable current settings
• Worker safety in identifying the source of power for disconnecting means and for egress from spaces containing large electrical equipment
• Grounding of disconnecting means installed on the supply-side of service disconnecting means
• Cables installed exposed on ceiling surfaces and sidewalls
• Special occupancies, special equipment, and special conditions, including installation of splash pads, the use of “Type P” cables in hazardous classified locations, and the reinspection of swimming pools and other bodies of water

Help protect life and property with the most relevant electrical requirements.

Get the cutting edge information you need to identify and overcome the latest hazards and complexities in electrical work. Order your copy of NFPA 70®, National Electrical Code, 2020 edition, today.

Equip your students with the knowledge and skills to maintain and troubleshoot complex heating, air conditioning, and refrigeration systems with REFRIGERATION & AIR CONDITIONING TECHNOLOGY, Ninth Edition. With content aligning to the latest industry standards, this trusted resource continues to provide leadingcontent and skill-building activities to prep learners for several certifications and exams -- ICE, NATE, HVAC Excellence, RSES, HARDi, and United Association (UA) STAR. This best-selling text offers the hands-on guidance, practical applications, and solid foundation your students need to understand HVAC service and repair, environmental challenges, and their solutions. Focused on sustainable technology, this edition covers technical advances in the industry while helping students develop important soft skills and a deeper understanding of customer relations issues. Memorable examples, more than 260 supporting photos, and unique Service Call features bring concepts to life and help students develop the skills needed for professional success. Available with this text is THE COMPLETE HVAC LAB MANUAL, which features more than 250 lab exercises covering 15 topic areas. See the supplements section for more details.

Building on a history of duct construction standards nearly 100 years old, the flagship SMACNA HVAC Duct Construction Standard – Metal & Flexible 4th edition represents the state of the art in the sheet metal duct fabrication and installation requirements. Significant changes for the 4th edition include; flat oval tables for positive/negative pressure applications; spray and aerosolized duct sealants; non-fiberglass duct liner applications; added information on spiral duct fittings; updates to duct hanger requirements; flexible duct hanger spacing and support bracing.

Key changes in the 2021 IFGC® include:

• The termination of concealed condensate piping requires marking to indicate if it is the primary drain or the secondary drain.
• Press-connect joints are acceptable for high pressure (over 5 psig) applications indoors.
• Commercial cooking appliances are not allowed within dwelling units.

Modern Refrigeration and Air Conditioning, 22nd Edition is focused on closing the gap from students to technicians with our commitment to top-quality coverage of fundamentals and the latest technology. This classic is an excellent blend of theory, skill development, and service techniques to help you learn how to install and service refrigeration and HVAC systems.

Equip your students with the knowledge and skills to maintain and troubleshoot complex heating, air conditioning, and refrigeration systems with REFRIGERATION & AIR CONDITIONING TECHNOLOGY, Ninth Edition. With content aligning to the latest industry standards, this trusted resource continues to provide leadingcontent and skill-building activities to prep learners for several certifications and exams -- ICE, NATE, HVAC Excellence, RSES, HARDi, and United Association (UA) STAR. This best-selling text offers the hands-on guidance, practical applications, and solid foundation your students need to understand HVAC service and repair, environmental challenges, and their solutions. Focused on sustainable technology, this edition covers technical advances in the industry while helping students develop important soft skills and a deeper understanding of customer relations issues. Memorable examples, more than 260 supporting photos, and unique Service Call features bring concepts to life and help students develop the skills needed for professional success. Available with this text is THE COMPLETE HVAC LAB MANUAL, which features more than 250 lab exercises covering 15 topic areas. See the supplements section for more details.