Tennessee Residential/Small Commercial Contractor License (BC-A,b)

Featuring time-tested safety concepts and the very latest industry standards in material design, the 2012 INTERNATIONAL BUILDING CODE offers up-to-date, comprehensive insight into the regulations surrounding the design and installation of building systems. It provides valuable structural, fire-, and life- safety provisions that cover means of egress, interior finish requirements, roofs, seismic engineering, innovative construction technology, and occupancy classifications for all types of buildings except those which are detached one and two family homes and townhouses not more than 3 stories high. The content in this code book is developed in the context of the broad-based principles that facilitate the use of new materials and building designs, making this an essential reference guide for anyone seeking a strong working knowledge of building systems.

Nonstructural
• All definitions are included in Chapter 2.
• Classifications for a variety of health-care related facilities have been clarified.
• Covered- and open-mall provisions revised to fully address the construction of open malls.
• Occupancies not specifically scoped under the unlimited area building provisions are now permitted where in compliance as accessory occupancies.
• Clarified provisions for incidental-use rooms and spaces.
• Modified provisions addressing exterior wall projections.
• Reformatted requirements for protection of vertical openings through floors.
• Automatic sprinkler systems required where furniture and mattresses are manufactured or stored.
• Increased capacity for stairways and other egress components in buildings with sprinklers and an emergency communication system.
• Clarification of when unenclosed stairways can be used as a part of the means of egress system, including how travel distance is measured.
• In three- and four-exit buildings, some exits are now permitted to serve a portion of a story rather than an entire story.
• Means of egress provisions unique to special occupancies are now in Chapter 4.
Structural
• Wind design requirements extensively revised.
• Wind load maps are now based on ultimate design wind speeds.
• New terminology for wind speeds.
• Updated seismic ground motion maps.
• The term “occupancy category” changed to “risk category.”
• Special inspection requirements for structural steel and masonry construction are now based on referenced standards.
• Penetration firestop and fire-resistant joint systems in high-rise buildings and in Risk Category III or IV structures require special inspection.
• Modifications to the seismic provisions of ACI 318 Appendix D.

The IRC contains many important changes such as:

• An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable.
• The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall.
• An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening.
• The exemption for interconnection of smoke alarms in existing areas has been deleted.
• New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine.
• New tables address alternative wood stud heights and the required number of full height studs in high wind areas.

The Code covers the design and construction of masonry structures, with subjects covered ranging from quality assurance to the details and development of reinforcement. Compliance with the Specification is required by the Code to control materials, labor and construction.

The “Building Code Requirements for Structural Concrete” (“Code”) provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code addresses structural systems, members, and connections, including cast-in-place, precast, plain, nonprestressed, prestressed, and composite construction. Among the subjects covered are: design and construction for strength, serviceability, and durability; load combinations, load factors, and strength reduction factors; structural analysis methods; deflection limits; mechanical and adhesive anchoring to concrete; development and splicing of reinforcement; construction document information; field inspection and testing; and methods to evaluate the strength of existing structures. “Building Code Requirements for Concrete Thin Shells” (ACI 318.2) is adopted by reference in this Code.The Code user will find that ACI 318-14 has been substantially reorganized and reformatted from previous editions. The principal objectives of this reorganization are to present all design and detailing requirements for structural systems or for individual members in chapters devoted to those individual subjects, and to arrange the chapters in a manner that generally follows the process and chronology of design and construction. Information and procedures that are common to the design of members are located in utility chapters.

The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate American Welding Society (AWS) standard. Uses of the Code include adoption by reference in a general building code, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code provisions cannot be included within the Code itself. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail.

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

Includes hardbound student edition aligned to the content standards.

This document is published jointly by the American Concrete Institute (ACI) and the American Society of Concrete Contractors (ASCC). It has been reviewed in accordance with the Educational Committee Manual document review procedures of the ACI Educational Activities Committee. ACI and ASCC reports are intended for guidance in planning, designing, executing, and inspecting construction. This document is intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains. A summary, review questions, and additional recommended reading list accompany each of the 12 chapters.

Drywall, joint compound, backerboard, plaster finishes, ceiling panels, sheathing gypsum-based products are essential for construction jobs large and small. From the planning process all the way down to the jobsite, understanding how and when to correctly use gypsum materials can mean the difference between a job well done and a construction nightmare. Since 1905, The Gypsum Construction Handbook has been the standard manual for construction professionals.

New materials, new methods, and new requirements demand new approaches, plain and simple. The gypsum revolution changed the world of building construction, and The Gypsum Construction Handbook has kept up with innovation in the industry ever since. This Seventh Edition update includes essential guidelines for using state-of-the art USG products, including innovative ultralight, sustainable, and low-dust materials.

USG has been the global leader in gypsum construction products for over a century, and the company employs the world’s premier experts on building with gypsum. These experts are the people who designed the leading products in the industry, and they are the people who wrote the book on how to use them.

This book includes detailed instructions for using USG products, including:

• USG Securock Brand Glass-Mat Sheathing
• USG Sheetrock Products
• USG Fiberock Panels
• USG Ceilings Brand Clean Room ClimaPlus Acoustical Panels
• USG Durock & Accessory Products
• USG Imperial & Diamond Brand Plasters

In addition, you’ll find general construction best practices for everything from framing to finishing. The Gypsum Construction Handbook also contains all the essentials on health, safety, code, and sustainability.

Code features reference the International Residential Code and International Building Code, familiarizing students with their requirements. Updated, color images have been added throughout the text to reinforce chapter topics. Over 75 illustrated step-by-step procedures guide student learning.

Updated through January 2023, the book provides a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.

This book features:

• 1903 – Inspections, Citations, and Penalties
• Part 1904 – Recording and Reporting Occupational Illnesses and Injuries
• Selected 1910 General Industry Standards
• OSHA Forms 300
• Sharps Injury Log
• This edition also includes Subpart AA - Confined Spaces

Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

Learn how to find the right kind of work, read and compute quantities from the plans, figure realistic crew and equipment productivity rates, consider job variables, calculate your O & P, then estimate and bid the job, and get the bonds you need. Also, how to deal with change orders and liquidated damages, choosing the right equipment, and handling safety issues.

When it comes to doing the actual work, you ll find the combined expertise of two long-time professionals, explaining how to follow and read the surveyor s reference stakes; how to check grade and line with an optical level, transit and pipe laser, and how to use GPS systems. See the best ways to clear the site, including asphalt and rock; handle rock, steep slopes and high groundwater; meet compaction requirements; install septic tanks and drain fields; all common types of water and sewer pipe, and how to do subsurface excavation.

Installation, repair and estimating for nearly every type of roof covering available today in residential and commercial structures: asphalt shingles, roll roofing, wood shingles and shakes, clay tile, slate, metal, built-up, and elastomeric. Covers sheathing and underlayment techniques, as well as secrets for installing leakproof valleys. Many estimating tips help you minimize waste, as well as insure a profit on every job. Troubleshooting techniques help you identify the true source of most leaks.

The new Third Edition of the Steel Deck Institute Manual of Construction with Steel Deck (MOC3) continues the tradition established by earlier editions to provide information necessary for the proper field usage of steel deck. This edition is reformatted for easier use with updated references, including those for the SDI QA/QC Standard for Quality Control and Quality Assurance of Steel Deck.

The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturers plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are panelized erection and common field issues.

This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9.

General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.

Custom Tab Bundle, please specify which books these tabs should reference at checkout

The NASCLA Contractors Guide to Business, Law and Project Management is organized into 3 sections.

Part 1 focuses on business planning and starting your business. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills.

Part 2 is centered on fundamentals that you will need to know to operate a successful construction business. This section will cover estimating, contract management, scheduling, project management, safety and environmental responsibilities and building good relationships with employees, subcontractors and customers.

Part 3 gives you valuable information for running the administrative function of your business. Financial management, tax basics and lien laws are covered. Effective management of these areas of business is vital and failure to give them proper attention can cause serious problems.